I. Product Overview
ZDY sequence (solitary-stage) hardened tooth cylindrical equipment reducer is created in accordance to JB/T8853-2001 normal, the item is optimized design, parallel shaft arrangement. Broadly used in mining, metallurgy, hoisting, transportation, cement, development, print and dyeing, pharmaceutical, textile, chemical and other industries.
II. Performance traits
one,The gears are produced of high high quality lower carbon alloy steel by normalizing and carburizing, the hardness of the gears reaches HRC58-sixty two, the gears are manufactured of grinding technological innovation with substantial precision and excellent get in touch with.
2,Higher transmission effectiveness: solitary-stage over ninety six.5%, double-phase above ninety three%, three-phase in excess of 90%.
three,Modest dimension, gentle weight, large precision, high bearing potential and extended service lifestyle.
4,High reliability, smooth procedure and minimal sounds.
5,The major parameters this sort of as middle length and transmission ratio are optimized design, and the principal areas are wonderful interchangeable, effortless to disassemble and effortless to set up.
six, Generally use oil pool lubrication, natural cooling, when the thermal power is inadequate, it can be cooled by circulating oil lubrication, supporter or cooling disc
III. Scope of software
1.Large velocity shaft input pace of the reducer is not far more than 1500r/min.
2. The circumferential velocity of reducer equipment drive is not much more than 20m/s.
three. The functioning temperature of the reducer is -40ºC ~ +50ºC. When beneath 0ºC, preheat the oil to over 0ºC ahead of starting.
4. The reducer can run in the two optimistic and unfavorable instructions.
★D for one stage, L for two phase, S for three stage, F for four phase, Y for the use of challenging-toothed equipment steering regulations: equipped with backstop reducer only permits a single-way procedure, the steering rules are: experiencing the output shaft, the output shaft clockwise procedure for “S”, counter-clockwise operation for “N”. If you need to have extended shaft series with backstop, make sure you specify it at the time of get, if it is not specified at the time of buy, it is deemed to be produced in accordance to normal (sample).
The quantity of lubricant is only a reference value, so insert it to the centre line of the gas label when refueling.
ZDY Collection Challenging-TOOTHED CYLINDRICAL Gear REDUCER
