I. Item Overview
ZDY sequence (single-phase) hardened tooth cylindrical equipment reducer is developed in accordance to JB/T8853-2001 regular, the item is optimized design, parallel shaft arrangement. Extensively utilised in mining, metallurgy, hoisting, transportation, cement, design, print and dyeing, pharmaceutical, textile, chemical and other industries.
II. Performance characteristics
one,The gears are created of high good quality minimal carbon alloy steel by normalizing and carburizing, the hardness of the gears reaches HRC58-sixty two, the gears are manufactured of grinding technologies with large precision and excellent get in touch with.
2,Substantial transmission effectiveness: one-phase over 96.5%, double-stage over 93%, a few-phase above 90%.
three,Modest measurement, light-weight bodyweight, substantial precision, high bearing capability and prolonged provider existence.
4,Large trustworthiness, clean procedure and minimal noise.
5,The main parameters this kind of as centre length and transmission ratio are optimized layout, and the major elements are great interchangeable, simple to disassemble and simple to set up.
six, Generally use oil pool lubrication, normal cooling, when the thermal power is inadequate, it can be cooled by circulating oil lubrication, supporter or cooling disc
III. Scope of software
one.Large speed shaft input pace of the reducer is not a lot more than 1500r/min.
two. The circumferential velocity of reducer gear travel is not a lot more than 20m/s.
three. The operating temperature of the reducer is -40ºC ~ +50ºC. When beneath 0ºC, preheat the oil to earlier mentioned 0ºC before starting up.
four. The reducer can run in the two positive and negative instructions.
★D for single stage, L for two phase, S for 3 stage, F for four stage, Y for the use of hard-toothed equipment steering restrictions: outfitted with backstop reducer only permits 1-way operation, the steering rules are: going through the output shaft, the output shaft clockwise operation for “S”, counter-clockwise operation for “N”. If you need to have extended shaft sequence with backstop, you should specify it at the time of buy, if it is not specified at the time of purchase, it is deemed to be created according to regular (sample).
The amount of lubricant is only a reference worth, so incorporate it to the heart line of the gas label when refueling.
ZDY Collection Difficult-TOOTHED CYLINDRICAL Gear REDUCER
