|
Notice: discover of set up (one) The foundation-plate should be plane and stoutness and the base-plate need to be screwed down and shock evidence. (2) The connecting shaft of primary mover, reducer and operation gadget must be coaxial installation. (three) The diameter tolerance zone of enter and output shaft is H6, the holes of fittings( this kind of as couplings, belt-pully, sprocket wheel and so on) should appropriately mate the shaft, which prevents bearing from breakage due to the fact of above-loose mate. (four) YWINrs these kinds of as sprocker wheel and equipment must be fitted near to bearings in purchase to decrease bending anxiety of hanging shaft. (five) While assembling motor of WPD reducer, it is necessary that correct quantity of butter applies to the heat shaft input gap and keyway, steering clear of assembling way too tightly and rusting soon after using for a lengthy time. (6) When ordering or utilizing all varieties of WPD type, if the motor excess weight is greater than the frequent, supporting set is necessary.
notice of usage (1) Before using, remember to check very carefully whether or not the reducer design, distance, ratio, input connecting method , output shaft construction, enter and output shaft route and revolving route accord with essential. (2) According to the necessity of selecting lubricant oil in the item handbook. You should fill appropriate class and model lubricant. And then screw on the vent-plug, unlock the modest cone-plug of vent-plug. Only following doing these, reducer is previously for starting up managing. The suitable brand name and ample lubricant oil is essential, changing oil in time conforming to the ask for of item handbook is also required, especially soon after using initial 100hours, it is needed refilling new oil. (three) When abnormal situation take place, make sure you cease and check reducer for each remedies and factors for faults of reducer(allowable greatest oil temperature is ninety five, underneath this temperature restrict, if oil temperature no a lot more goes up, make sure you let reducer keep on operating). Input Power(KW)
|
FAQ:
one.Item sources
All the merchandise sold in this retailer are ZhenYu brand,factory-direct sale,no department
the Linear guidebook will usually with motor,driver and controller to be a comprehensive manage technique that we can provide
two.Model variety
Before acquiring, you should contact us to verify the product no and requirements to avoid any misunderstanding.
3.Payment
Sample fee need to be fully paid prior to generation, for bulk buy, fifty% YWIN is required and equilibrium just before cargo.
Paypal is recognized.
four.Shipping
Samples in inventory will be delivered within 7 days and custom-made samples will be sent inside of thirty days.
Supply date for bulk get relies upon on order quantity.
