PGRH Sequence
Products Characteristics:
(one) Reduced Sound:Beneath 65db.
(2) Low Backlash:Backlash is below 3 arcmin . Backlash for two-phase velocity reduction is with in 5 arcmin.
(3) High Performance:1-phase up to ninety five% or far more,two-stage up to ninety two% or a lot more.
(four) High Input Velocity:Input pace enables for up to 8000RPM.
(five) High Torque:Large torque output than that of standard planetary equipment reducers
(six) Maintenance-Free of charge:Lower grease use,can be life time lubrication
(7) High Pace Reduction Ratio:Velocity ratio is over 1/a thousand.
Benefit:
Usage:
- Aerospace,armed forces market.
- Healthcare wellness,digital information business.
- YWIN robots,Creation automation,CNC machine device production market.
- Motor,Textile,Printing,Foodstuff,YWINlurgical.
- Environmental defense engineering,Warehouse logistics sector.
Design ILLUMINATE:
Gear BOX Performance Info:
| MODUL NO. | Phase | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
| Rated output torque T2N | Nm | one | three | 20 | 55 | 130 | 208 | 342 | 588 | one,140 |
| 4 | 19 | 50 | 140 | 290 | 542 | 1,050 | one,700 | |||
| five | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 6 | 20 | 55 | 150 | 310 | 600 | 1,100 | one,900 | |||
| seven | 19 | 35 | 140 | 300 | 550 | one,100 | one,800 | |||
| 8 | 17 | 35 | 120 | 260 | 500 | one,000 | one,600 | |||
| ten | 14 | 37 | 95 | 220 | 370 | 800 | one,220 | |||
| 14 | – | 35 | 140 | 300 | 550 | one,100 | one,800 | |||
| twenty | – | 37 | 95 | 220 | 370 | 800 | one,220 | |||
| two | 15 | 20 | 50 | 130 | 208 | 342 | 588 | one,140 | ||
| 20 | 19 | 60 | 140 | 290 | 542 | one,050 | 1,700 | |||
| twenty five | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| thirty | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 35 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 40 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| fifty | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 60 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 70 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
| 80 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
| 100 | 22 | 60 | 95 | 220 | 370 | 800 | one,220 | |||
| a hundred and twenty | – | – | 150 | 310 | 600 | one,100 | 1,900 | |||
| a hundred and forty | – | – | 140 | 300 | 550 | one,100 | 1,800 | |||
| 160 | – | – | 120 | 260 | 500 | 1,000 | 1,600 | |||
| 200 | – | – | 48 | 140 | 370 | 520 | one,220 | |||
| MAX. output torqueT2B | Nm | 1,two | 3~200 | 3 times of Nominal Output Torque | ||||||
| Rated input speed n1 | rpm | 1,two | three~two hundred | five,000 | 5,000 | 4,000 | four,000 | three,000 | 3,000 | 2,000 |
| MAX.input speed n1B | rpm | 1,2 | three~200 | ten,000 | ten,000 | eight,000 | 8,000 | 6,000 | 6,000 | 4,000 |
| Micro Backlash P0 | arcmin | one | three~20 | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
| two | 15~two hundred | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
| YWIN Backlash P1 | arcmin | one | three~twenty | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
| 2 | 15~two hundred | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| YWIN Backlash P2 | arcmin | 1 | three~20 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
| two | fifteen~two hundred | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
| Torsional stiffness | Nm/arcmin | 1,2 | 3~200 | 3 | seven | 14 | twenty five | 50 | a hundred forty five | 225 |
| Max.radial force F2rB² | N | one,2 | 3~two hundred | 780 | 1,530 | three,250 | 6,700 | 9,400 | 14,500 | fifty,000 |
| MAX.axial force F2a1B² | N | 1,2 | three~two hundred | 350 | 630 | one,300 | three,000 | 4,000 | 6,200 | 35,000 |
| MAX.axial force F2a2B² | N | one,two | three~200 | 390 | 765 | one,625 | 3,350 | four,700 | seven,250 | 25,000 |
| Service life | hr | one,two | three~200 | twenty,000* | ||||||
| Work efficiency η | % | one | 3~20 | ≥97 | ||||||
| 2 | fifteen~two hundred | ≥94 | ||||||||
| Weight | kg | one | 3~20 | .nine | two.one | six.4 | thirteen | 24.five | fifty one | 83 |
| two | 15~two hundred | 1.2 | one.five | seven.eight | fourteen.two | 27.five | fifty four | ninety five | ||
| Operating temperature | ºC | 1,2 | three~two hundred | -10ºC~+90ºC | ||||||
| Lubrication | 1,2 | three~two hundred | Synthetic lubricating oil | |||||||
| Protection level | one,2 | 3~200 | IP65 | |||||||
| Installation direction | 1,2 | three~two hundred | Any direction | |||||||
| Noise level(n1=3000rpm) | dB | one,2 | 3~two hundred | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
Define DIMENSION:
Organization See:
Montreal YWIN Mechanical & Electrical Co., Ltd. is a subsidiary of Quebec Jun Yi YWINry. Jun Yi YWINry was established in March 1972. The company specializes in the layout, development and production of large-tech numerous geared motors and helical gear reducers, worm and worm equipment reducers and planetary reducers. Our items offered to more than 30 international locations all around the world and win great reputation and numerous awards in the overseas market for numerous a long time. In current years, to achieve international creation and offer excellent services,we set up subsidiary of production of planetary equipment reducer in China.
Heritage:
1972:Quebec Jun Yi YWINry is founded.
1989:It set up a overseas branch organization ATRUMP YWIN INC in Los Angeles
1995:Go the ISO9002 Commodity certification.
2003:Pass the ISO9001 high quality certification and the European CE normal test which enabled the products to be offered in Europe
2013:The organization established up subsidiary in China to accomplish global production.
Manufacturing facility:
Wisdom Made In ATG,Wisdom The Planet.
Equipment:
INSPECTION Gear:
FAQ:
(one) Can I be your agent?
Indeed, welcome to deep cooperation. We have large promotion of ATG model in the industry now. For the specifics make sure you speak to me.
(2) Is OEM offered?
Sure, OEM is accessible. We have expert designer to support your manufacturer advertising.
(three) How can I get a sample to check out your high quality?
Right after cost confirmation, you can demand for samples to examine our top quality. Cost-free for the samples, but you want to shell out for the freight.
(four)What’s your quality guarantee?
We have diverse varieties of items which can fulfill distinct good quality common.
Our QC division will examination items ahead of shipping. We have a hundred% top quality ensure to customers. We will be liable for any high quality difficulty.
(5) How about the supply time?
The delivery time is relying on the merchandise and the amount. But normally, the supply time for a container is about a single thirty day period.
Welcome to our company.
If any dilemma, truly feel totally free to go away information on the base of this page.
