Observe: notice of set up (one) The foundation-plate should be plane and stoutness and the foundation-plate should be screwed down and shock proof. (two) The connecting shaft of prime mover, reducer and operation device must be coaxial set up. (3) The diameter tolerance zone of enter and output shaft is H6, the holes of fittings( this sort of as couplings, belt-pully, sprocket wheel and so on) should appropriately mate the shaft, which stops bearing from breakage since of more than-loose mate. (4) YWINrs these kinds of as sprocker wheel and gear must be equipped close to bearings in order to reduce bending pressure of hanging shaft. (five) While assembling motor of WPD reducer, it is essential that proper sum of butter applies to the warm shaft input hole and keyway, avoiding assembling also tightly and rusting soon after using for a long time. (6) When ordering or utilizing all sorts of WPD kind, if the motor weight is bigger than the common, supporting set is required.
notice of usage (one) Before making use of, you should verify very carefully no matter whether the reducer product, distance, ratio, enter connecting strategy , output shaft construction, enter and output shaft course and revolving direction accord with required. (two) According to the requirement of picking lubricant oil in the solution handbook. You should fill correct classification and brand lubricant. And then screw on the vent-plug, unlock the small cone-plug of vent-plug. Only following carrying out these, reducer is already for beginning up operating. The suitable brand and satisfactory lubricant oil is required, replacing oil in time conforming to the request of solution manual is also necessary, specially after making use of 1st 100hours, it is required refilling new oil. (three) When irregular conditions happen, you should end and verify reducer for each options and reasons for faults of reducer(allowable maximum oil temperature is 95, underneath this temperature limit, if oil temperature no more goes up, make sure you let reducer proceed operating). Input Electricity(KW)
Requirements:
|
FAQ:
one.Product sources
All the items bought in this store are ZhenYu manufacturer,manufacturing facility-immediate sale,no branch
the Linear information will always with motor,driver and controller to be a comprehensive management method that we can provide
2.Design choice
Prior to acquiring, please speak to us to confirm the model no and specs to avoid any misunderstanding.
3.Payment
Sample price need to be fully compensated before creation, for bulk purchase, fifty% YWIN is required and equilibrium prior to shipment.
Paypal is recognized.
four.Shipping and delivery
Samples in inventory will be delivered inside of seven days and personalized samples will be delivered in thirty days.
Shipping day for bulk order depends on buy quantity.