I. Item Overview
ZDY sequence (single-stage) hardened tooth cylindrical equipment reducer is created in accordance to JB/T8853-2001 normal, the solution is optimized style, parallel shaft arrangement. Commonly employed in mining, metallurgy, hoisting, transportation, cement, construction, print and dyeing, pharmaceutical, textile, chemical and other industries.
II. Overall performance attributes
1,The gears are created of high top quality low carbon alloy steel by normalizing and carburizing, the hardness of the gears reaches HRC58-sixty two, the gears are created of grinding technology with substantial precision and great get in touch with.
2,Substantial transmission performance: one-phase more than ninety six.five%, double-stage above 93%, a few-phase in excess of ninety%.
3,Modest size, light fat, substantial accuracy, high bearing capacity and extended provider existence.
four,Large dependability, smooth procedure and minimal noise.
five,The main parameters this kind of as centre length and transmission ratio are optimized layout, and the main elements are wonderful interchangeable, simple to disassemble and effortless to put in.
six, Typically use oil pool lubrication, all-natural cooling, when the thermal electricity is inadequate, it can be cooled by circulating oil lubrication, supporter or cooling disc
III. Scope of application
one.High speed shaft input pace of the reducer is not a lot more than 1500r/min.
two. The circumferential speed of reducer gear generate is not more than 20m/s.
three. The doing work temperature of the reducer is -40ºC ~ +50ºC. When under 0ºC, preheat the oil to above 0ºC just before starting.
four. The reducer can run in the two positive and unfavorable directions.
★D for solitary phase, L for two stage, S for three phase, F for 4 phase, Y for the use of difficult-toothed gear steering laws: equipped with backstop reducer only makes it possible for a single-way operation, the steering laws are: experiencing the output shaft, the output shaft clockwise operation for “S”, counter-clockwise procedure for “N”. If you need lengthy shaft sequence with backstop, please specify it at the time of buy, if it is not specified at the time of purchase, it is regarded as to be produced according to regular (sample).
The amount of lubricant is only a reference worth, so include it to the center line of the fuel label when refueling.
ZDY Sequence Challenging-TOOTHED CYLINDRICAL Gear REDUCER
