Umc Wheel Gearbox on Valmont Center Pivot and Lateral Move Irrigation System

UMC® is the market chief in gearbox technology. In excess of our forty year background we have released several market altering gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. We keep on to outline and redefine industry specifications for gearbox functionality, top quality, features and technological innovation. Our gearboxes are function developed to do the task. In no way more than-engineered.

UMC® stands guiding its products and is dedicated to manufacturing the greatest merchandise for a world-wide industry.

740-U 50:1 Ratio

Created for for a longer time spans, larger wheels, and heavier towers.

Features and Advantages

2.25 inch output shaft
50:1 equipment ratio
Cartridge input and output seals
Larger enter bearings
Enter shaft guard
External seal protectors for enter and output seals
Top oil fill plug
Common mounting sample
Entire cycle enlargement chamber with stainless steel protect
Filled with intense strain worm gear oil
Steel output shaft and enter shaft
Tapered roller bearings
Consists of carriage bolts and nuts
Dual ended enter shaft

740-UV 52:1 Ratio
Developed for more time spans, greater wheels and heavier towers in which an prolonged output shaft is necessary.
This gearbox has all the very same abilities, functions and advantages that the regular 740 has with a few tweaks. The output shaft is extended, the equipment ratio is 52:1 and the input shaft is created of ductile iron with a 25° stress angle permitting this gearbox to be utilized on middle pivot and lateral transfer/ linear systems that occur common with these technical specs.

Characteristics and Advantages

2.25 inch extended output shaft
52:1 gear ratio with 25° force angle
Cartridge enter and output seals
Bigger input bearings
Input shaft guard
Exterior seal protectors for enter and output seals
Top oil fill plug
Common mounting pattern
Complete cycle growth chamber with stainless steel cover
Loaded with severe strain worm equipment oil
Metal output shaft and ductile iron enter shaft
Tapered roller bearings
Contains carriage bolts and nuts
Twin finished enter shaft

760-UV YWIN

Designed for corner techniques and lateral move carts exactly where an prolonged output shaft is required

Growers normally use UMC’s 760-UV gearbox for the most severe apps where an prolonged output shaft is essential. The gearbox is made for larger yearly several hours of procedure although handling the weighty loads experienced on corner programs and lateral shift carts as effectively as the most extreme discipline circumstances exactly where wheel rutting is notable, soil is large, and tower weights are larger.

The UMC® 760-UV final drive gearbox is our largest and most sturdy gearbox with an prolonged output shaft. It attributes a greater-diameter bull gear than the standard 740 sequence to deal with 20% greater torque. It also attributes a two.5″ output shaft to accommodate much more overhung load. It is developed for use on center pivots, corners, lateral go/ linear irrigation techniques and carts exactly where a fifty two:1 gear ratio and prolonged output shaft are common technical specs.

Characteristics and Rewards

two.5″ output shaft
52:one equipment ratio with a 25° stress angle
Special dual input and output seal design
twenty% a lot more torque potential than the normal 740
Bronze gear optional
Greater input bearings
Enter shaft guard
Exterior seal protectors for enter and output seals
11-Bolt mounting sample
Total cycle expansion chamber with aluminum go over
Stuffed with excessive force worm equipment oil
Steel output shaft and ductile iron enter shaft
Tapered roller bearings
Consists of carriage bolts and nuts
Dual ended input shaft

TNT-2 YWIN

Created for apps exactly where the irrigation method could require to be towed

This gearbox is the excellent remedy for a towable irrigation system. Growers typically favor this gearbox above a gearbox with a towable hub. Simply disengage the worm and tow your technique to its doing work area, then re-engage the worm and you are completely ready to operate. The CX coupler is the perfect compliment for the TNT-two gearbox because of to the capacity to handle coupler disengagement at the gearbox.

The UMC® patented TNT-two closing drive gearbox is created especially for apps where a centre pivot or lateral shift/ linear irrigation method requirements to be towed. The gearbox supplies the capacity to disengage the worm gear and enables consumers to go techniques from one particular location to an additional without demanding a Towable Hub incorporate on.

Functions and Positive aspects

two.25″ output shaft
50:one gear ratio
Dual enter seals with triple lip output seals
Bronze gear optional
Enter shaft guard
External seal protectors for enter and output seals
Leading oil fill plug
eleven-Bolt mounting sample
Complete cycle expansion chamber with stainless metal go over
Loaded with severe pressure worm gear oil
Steel output shaft and input shaft
Tapered roller bearings
Consists of carriage bolts and nuts
Dual ended enter shaft

760-UV Bronze YWIN

Created for the most excessive situations where an extended output shaft is essential.

Growers typically use The UMC® 760-UV bronze gearbox for the most excessive apps the place an extended output shaft is necessary. The gearbox is made for greater once-a-year hrs of procedure even though managing the weighty masses experienced on corner systems and lateral shift carts as effectively as the most excessive area circumstances in which wheel rutting is well known, soil is heavy, and tower weights are larger.

The UMC® 760-UV Bronze last travel gearbox is our biggest and most tough gearbox with an extended output shaft created for the most intense expanding situations. It features a substantial energy aluminum bronze bull gear and a heat treated steel worm gear giving it a significantly greater load capability than the common 760-UV. Moreover, this equipment mix greatly minimizes gear use, extending the valuable daily life of the gearbox. It also functions a 2.5″ output shaft to accommodate much more overhung load. It is made for use on middle pivots, corners, lateral go/ linear irrigation methods and carts where a fifty two:1 equipment ratio and prolonged output shaft are common specs.

Functions and Benefits

two.5″ output shaft
52:one equipment ratio with a 25° pressure angle
Special dual enter and output seal design
Bronze Gear
Warmth Taken care of Steel Worm Equipment
More substantial input bearings
Input shaft guard
Exterior seal protectors for input and output seals
11-Bolt mounting pattern
Full cycle growth chamber with aluminum protect
Loaded with extreme strain worm equipment oil
Steel output shaft
Tapered roller bearings
Consists of carriage bolts and nuts
Twin finished input shaft
Also Obtainable Assembled in the United states of america

UMC is the industry chief in gearbox engineering. In excess of 37 calendar year background they have launched a lot of market changing gearboxes this sort of as the patented TNT gearbox, the 740, the 760, the 775 and much more. UMC carry on to determine and redefine business expectations for gearbox functionality, top quality, attributes and technological innovation. UMC gearboxes are objective built to do the occupation. Never ever over-engineered.UMC stands driving its items and is dedicated to manufacturing the ideal products for a international market.