Umc TNT-2 Gearbox Perfect Solution for a Towable Center Pivot Irrigation System.

UMC® is the industry leader in gearbox technologies. More than our forty 12 months historical past we have released numerous industry altering gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and much more. We continue to determine and redefine sector standards for gearbox efficiency, high quality, characteristics and technologies. Our gearboxes are goal created to do the task. Never ever more than-engineered.

UMC® stands guiding its products and is fully commited to manufacturing the greatest items for a world-wide market.

740-U 50:1 Ratio

Developed for for a longer time spans, bigger wheels, and heavier towers.

Characteristics and Advantages

2.twenty five inch output shaft
fifty:1 equipment ratio
Cartridge input and output seals
Bigger input bearings
Input shaft guard
Exterior seal protectors for enter and output seals
Best oil fill plug
Universal mounting sample
Complete cycle enlargement chamber with stainless metal go over
Filled with excessive stress worm equipment oil
Metal output shaft and input shaft
Tapered roller bearings
Includes carriage bolts and nuts
Twin finished input shaft

740-UV 52:1 Ratio
Created for more time spans, larger wheels and heavier towers exactly where an prolonged output shaft is needed.
This gearbox has all the very same abilities, attributes and benefits that the regular 740 has with a few tweaks. The output shaft is prolonged, the gear ratio is 52:1 and the input shaft is produced of ductile iron with a 25° strain angle permitting this gearbox to be employed on centre pivot and lateral go/ linear systems that come common with these technical specs.

Attributes and Advantages

2.twenty five inch extended output shaft
52:one gear ratio with 25° pressure angle
Cartridge input and output seals
More substantial enter bearings
Enter shaft guard
External seal protectors for enter and output seals
Best oil fill plug
Common mounting sample
Entire cycle expansion chamber with stainless steel cover
Stuffed with severe force worm gear oil
Steel output shaft and ductile iron enter shaft
Tapered roller bearings
Contains carriage bolts and nuts
Twin ended enter shaft

760-UV YWIN

Developed for corner methods and lateral move carts exactly where an extended output shaft is essential

Growers typically use UMC’s 760-UV gearbox for the most excessive apps where an extended output shaft is required. The gearbox is made for greater annual hrs of procedure while dealing with the weighty hundreds seasoned on corner techniques and lateral shift carts as properly as the most extreme field problems the place wheel rutting is distinguished, soil is heavy, and tower weights are higher.

The UMC® 760-UV last travel gearbox is our greatest and most sturdy gearbox with an extended output shaft. It attributes a greater-diameter bull gear than the standard 740 sequence to deal with twenty% increased torque. It also characteristics a two.5″ output shaft to accommodate far more overhung load. It is created for use on heart pivots, corners, lateral transfer/ linear irrigation programs and carts in which a 52:1 equipment ratio and extended output shaft are normal requirements.

Characteristics and Advantages

2.5″ output shaft
fifty two:1 equipment ratio with a 25° stress angle
Unique twin input and output seal layout
20% a lot more torque capability than the standard 740
Bronze equipment optional
Greater input bearings
Input shaft guard
Exterior seal protectors for enter and output seals
11-Bolt mounting pattern
Total cycle growth chamber with aluminum go over
Stuffed with excessive stress worm equipment oil
Steel output shaft and ductile iron input shaft
Tapered roller bearings
Contains carriage bolts and nuts
Dual finished input shaft

TNT-two YWIN

Made for apps where the irrigation technique may possibly want to be towed

This gearbox is the ideal remedy for a towable irrigation system. Growers usually prefer this gearbox over a gearbox with a towable hub. Simply disengage the worm and tow your program to its functioning area, then re-have interaction the worm and you are ready to operate. The CX coupler is the perfect compliment for the TNT-2 gearbox thanks to the capacity to control coupler disengagement at the gearbox.

The UMC® patented TNT-two closing drive gearbox is created exclusively for purposes where a middle pivot or lateral go/ linear irrigation method requirements to be towed. The gearbox offers the potential to disengage the worm gear and allows customers to transfer methods from one area to an additional without having necessitating a Towable Hub add on.

Attributes and Advantages

2.25″ output shaft
50:one equipment ratio
Dual enter seals with triple lip output seals
Bronze gear optional
Input shaft guard
External seal protectors for input and output seals
Top oil fill plug
11-Bolt mounting sample
Total cycle expansion chamber with stainless steel cover
Crammed with intense stress worm equipment oil
Steel output shaft and enter shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual finished input shaft

760-UV Bronze YWIN

Created for the most intense conditions where an prolonged output shaft is essential.

Growers normally use The UMC® 760-UV bronze gearbox for the most severe apps in which an extended output shaft is needed. The gearbox is designed for increased annual hrs of procedure while managing the large loads knowledgeable on corner techniques and lateral transfer carts as nicely as the most intense subject situations the place wheel rutting is distinguished, soil is large, and tower weights are larger.

The UMC® 760-UV Bronze last drive gearbox is our biggest and most sturdy gearbox with an extended output shaft created for the most severe growing situations. It characteristics a high strength aluminum bronze bull equipment and a warmth handled steel worm equipment supplying it a a lot greater load ability than the normal 760-UV. Furthermore, this equipment mix drastically decreases gear dress in, extending the beneficial daily life of the gearbox. It also characteristics a 2.5″ output shaft to accommodate far more overhung load. It is developed for use on center pivots, corners, lateral shift/ linear irrigation techniques and carts where a 52:1 gear ratio and extended output shaft are common requirements.

Attributes and Advantages

two.5″ output shaft
fifty two:1 gear ratio with a 25° force angle
Unique twin input and output seal layout
Bronze Equipment
Heat Taken care of Metal Worm Equipment
Larger input bearings
Input shaft guard
External seal protectors for enter and output seals
eleven-Bolt mounting pattern
Entire cycle growth chamber with aluminum go over
Loaded with intense stress worm gear oil
Metal output shaft
Tapered roller bearings
Includes carriage bolts and nuts
Dual finished enter shaft
Also Available Assembled in the United states

UMC is the sector chief in gearbox technologies. More than 37 year background they have released many business changing gearboxes this kind of as the patented TNT gearbox, the 740, the 760, the 775 and far more. UMC keep on to determine and redefine industry specifications for gearbox efficiency, good quality, characteristics and technology. UMC gearboxes are purpose built to do the task. Never ever in excess of-engineered.UMC stands behind its products and is committed to production the best goods for a worldwide marketplace.