| No. | item | Parameter(all is subject to our final design) | |
| 1 |
Suitable raw material | Kind | Common galvanized & pre-painted steel |
| Yield strength | 235MPa(or other high strength steel) | ||
| Thickness(mm) | .four-.7 | ||
| width(mm) | According to final design | ||
| two | Manual uncoiler’s capacity | Max.5tons | |
| 3 | Forming speed(m/min) | About 18-20m/min | |
| 4 | Main motor power(KW) | seven.5kw | |
| five | YWIN power(KW) | 3kw | |
| 6 | Forming roller groups | Around19-20 groups | |
| 7 | Raw material of forming roller | High quality No.45 steel | |
| 8 | Raw material of cutting blade | Cr12mould steel with quenched treatment | |
| 9 | controlling system | Mitsubishi PLC& converter | |
| ten | Suitable industrial voltage | According to your special requirement | |
| 11 | YWIN dimensions(L*W*H) | six.8m×1.8m×1.52m | |
| 12 | YWIN weight | About 9-10tons | |
YWIN’s factors:
-5 tons handbook uncoiler
-Coil sheet feeding and guiding deparment
-Main forming deparment
-Slicing division
-PLC management desk
-YWIN station
-Last merchandise operate out table
Raw materials of equipment main deparment:
-Major roller: Higher quality No. 45 solid metal, plated difficult chrome on the floor of roller with thickness .05mm
-Slicing blade: Cr12 mould metal with quenched therapy
-Electrical factors: PLC control method and transducer from Japan Mitsubishi Other areas from Chinese renowned model.
