Brif introduction:
IS sequence is a single phase single suction centrifugal pump,largely ideal for market and metropolis water provide,sewage drainage,and agricultural irrigation,consequently it is extensively utilized.
Parameters:
Flow rate:Q=three.3~460m3/h
Total head:H=4~133m
Pace:n=1450rpm/2950rpm
S.g.:γ ≤1.1
Temperature:T=-~80ºC
Pump diameter:50~200mm
Attributes:
- IS series is designed based on the performance and dimension requirements of ISO2858.
- Radially split casing design,back pull structure.
- During maintenance,the rotary part can be removed from the casing without dismantle the pipelines.
- The working chamber consists of pump casing and pump cover.
Structure:
- Single stage,single suction,cantilever type centrifugal pump.
- Pump set consists of casing,pump cover,impeller,shaft,sealing rings,shaft sleeve and bearing housing…
- Foot mounted,radial split casing
- Both mechanical seal and packing seal are available
- The rotary part is supported by bearing housing,bearings manage the axial and radial forces.
Structure drawing is as below
1. Pump casing 2. Impeller nut 3. Sealing ring 4. Brake washer 5. Impeller 6. Pump cover 7. Shaft sleeve 8. Stuffing ring 9. Stuff 10. Stuffing cover 11. Hanger bracket bearing parts 12. Shaft
Configuration:
Software:
- Mainly applied in the industry and city water supply,sewage drainage,and agricultural irrigation.
- Suitable to pump clean water,or fluids have close physical and chemical characters.
Efficiency:
