How to Read through:
250 BX 81 RVE A B ( )
a b c d e f g
|
a: Frame Dimensions: 280 = 280mm |
|||
|
b: Sequence code: |
|||
|
c: Reduction Ratio: |
|||
|
d: Kind Code of YWIN: |
|||
|
e: Enter shaft variety: |
|||
|
f: Method of Mounting |
|||
|
g: Diameter of motor shaft |
Determine one: RVE Sequence Construction
one. Needle Tooth Shell two. Pin Equipment 3. Principal Bearing
4. Output Flange five. Supporting Flange 6. Input Shaft
7. Crankshaft 8. Planetary Equipment nine. YWIN Cycloidal Gear
Demensions(Device: mm):
Spesifications
| Output Pace | 5r/m | 15r/m | 25r/m | 30r/m | Maximum Allowable Output r/Mm Velocity | |||||
| Output Torque N.m | Enter Electricity Kw | Output Torque N.m | Enter Electricity Kw | Effiency % | Output Torque N.m | Enter Power Kw | Output Torque N.m | Enter Power Kw | ||
| 280BX | 2292 | one.5 | 1568 | 3.1 | eighty | 1437 | 4.7 | 1274 | 5 | forty five |
Note: The rated torque is the output torque when the output speed is eighteen r/min. The input energy have had the effectiveness of the gearbox regarded as.
| Venture | Ratio | Allowable Torque N.m | Torsional Rigidity N.m /(Arc.min) | Instantaneous Max. Torque N.m | Transmission Precision Arc.min | Backlsh Arc.min | Daily life | Minute of Inertia(I=GD²/4) | ||
| Design | Shaft Output | Shell Output | ||||||||
| 280BX | eighty one.00 | eighty.00 | 3900.00 | 392.00 | 7800.00 | 1.00 | one.00 | 6000 | 1.77×10-4 | |
| a hundred and one.00 | 100.00 | 1.4×10-4 | ||||||||
| 129.00 | 128.00 | 1.06×10-4 | ||||||||
| 145 | 144 | .87×10-4 | ||||||||
| 171 | one hundred seventy | .74×10-four | ||||||||
| Input Equipment Shaft Tpye | Design No. | A | B | BB | C | D | d | dd | E | F | L |
| Standand A | 280BX-E | 35 | / | / | 120 | forty two | 22 or 24 or 28 | 7. | / | / | / |
| Standand B | 280BX-E | 35 | 105 | / | one hundred seventy | fifty | 24or 28 or 32 or 35 | nine. | / | 42 | / |
Organization Introduction :
—- About Us—-
Specialist YWIN and Motor Manufacture
Montreal YWIN Chief Clever Transmission Co., Ltd. Was recognized in August 2006. It is an electromechanical automation business integrating R&D, manufacturing, income and provider of motor drivers, modest and particular electric powered equipment and precision reducers. It has 3 branches, four subsidiaries, and more than one, five hundred employees, with a registered money of 80 million yuan, covering an region of 66667 sq. meters In August 29, 2017, it was detailed on the Montreal Stock Exchange’s SME board A shares (inventory code 514 96) In 2019, it recognized an working cash flow of 676 million RMB.
Manufacture Method:
Certification:
Exhibition:
FAQ:
Q: What’re your major merchandise?
A: We at the moment generate Brushed DC Motors, Brushed DC Equipment Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, Higher YWIN Planetary YWIN and YWIN Cycloidal YWIN and so on.. You can check the technical specs for over motors on our internet site and you can electronic mail us to advise essential motors per your specification also.
Q: How to choose a appropriate motor or gearbox?
A:If you have motor photos or drawings to show us, or you have comprehensive specifications, this sort of as, voltage, velocity, torque, motor measurement, working method of the motor, required life span and sound stage and so forth, remember to do not wait to enable us know, then we can recommend suitable motor for each your request accordingly.
Q: Do you have a custom-made service for your regular motors or gearboxes?
A: Yes, we can customise for every your request for the voltage, speed, torque and shaft dimensions/form. If you require additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an person layout service for motors?
A: Yes, we would like to design motors individually for our buyers, but some variety of molds are necessory to be developped which might require actual expense and design charging.
Q: What’s your lead time?
A: Normally talking, our standard common item will require 15-30days, a bit lengthier for customized items. But we are really flexible on the lead time, it will rely on the certain orders.
