Introduction:
1. HS series slurry pump is created for the ongoing pumping of high abrasive, large density slurries with minimal maintenance requirements. The sporting components are created of ultra chrome or and rubber. It will maintain large performance above the dress in daily life of its elements.
2. The steel damp parts and rubber ones can be interchangeable for managing distinct liquids or slurries.
three. HS slurry pumps are accessible in dimensions ranging from 1 inch to 18 inch discharge and attribute high performance efficiency able of flow costs from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for high head versions.
Functions:
1. Cylindrical framework of bearing assembly: convenient to change the place in between impeller and entrance liner
and can beremoved entirely
2. Interchangeable anti-abrasive soaked elements produced of large-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs provide large running pressure capabilities
and an further evaluate of safety.
4. The discharge branch can be oriented to any 8 positions at the interval of 45 levels
5. A variety of push kinds: DC(direct link), V-belt travel, gear box reducer, hydraulic couplings, VFD,
SCR control, and so forth
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Normal Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • YWIN |
| • Alumina YWIN | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Model | Max Energy (Kw) |
Inlet & Outlet size (inch) | Materials for Wear Areas | Circulation Charge (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/1 | M | 12.6~28.eight | 3.five~eight | 6~sixty eight | 1200~3800 | 152 |
| R | ten.8~twenty five.two | three~7 | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/one.5 | M | 32.four~seventy two | 9~20 | six~58 | 1200~3200 | 184 |
| R | twenty five.two~fifty four | 7~15 | 5.five~forty one | 1000~2600 | 178 | |||
| 50HS-C | thirty | three/2 | M | 39.six~86.four | 11~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.6 | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | four/three | M | 86.4~198 | 24~fifty five | nine~fifty two | 1000~2200 | 245 |
| R | seventy nine.two~one hundred eighty | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/four | M | 162~360 | 40~one hundred | twelve~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | 12~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | eight/six | M | 360~828 | one hundred~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | seven~forty nine | 400~one thousand | 510 | |||
| 200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~400 | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | 170~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | seven~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven-hundred~1500 | 13~fifty seven | two hundred~four hundred | 1370 |
| 25HHS-C | 30 | 1.5/one | M | 16.two~34.two | four.5~9.5 | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | sixty eight.four~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/4 | M | 324~720 | ninety~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | a hundred thirty~280 | twenty~ninety four | 500~a thousand | 711 |
For the materials of donning elements,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to speak to us any time for details.
Your inquiry will get our prompt interest and reaction !
