Drag Industrial Standard Roller Narrow Series Welded Steel Transmission Chain

Drag Industrial Standard Roller Narrow Series Welded Steel Transmission Chain

INTRODUCTION
Scraper Chain for Grain YWINs (Welded Metal Chain)

The welded metal chain is also called scraper chain, and is broadly employed throughout the grain processing industry. It is suitable with abrasive components, and mostly supports minimal speed load carrying. In addition, it is in a position to perform in extreme environments with hefty dust and strong impacts.
This kind of conveyor chain is composed of bended sidebars which are specifically the identical. The sidebars are related with every other right without having other types of hyperlink plates. The chain hyperlink can be either odd or even variety. The sleeve and sidebars are welded collectively, which ensures straightforward but tough structure.
In order to make scraper chains with enhanced top quality and prolonged support lifestyle, we undertake automatic welding robots to weld the bushing and sidebar with each other. The precision products guarantees uniform and secure welding good quality. Meanwhile, we perform inspections according to the Good quality Management YWIN of global top roller chain producers. In addition, according to the proportion of five%, our welded metal chain goods undergo carry out harmful checks to make sure authorized welding top quality. Our patented large frequency induction heating treatment for the pins gives greater strength even though bettering the putting on resistance.

Chain No. Pitch P (mm) Outer diameter of bushing d1 (mm) Diameter of pin d2 (max) (mm) Top of sidebar h2 (max) (mm) Internal width between modest ends b1 (mm) Outer width between tiny ends b2 (mm) Thickness of sidebar T (mm) Dimension of scraper Tensile toughness Q (min) (KN)
L1 (mm) L2 (mm) L3 (mm) D (mm)
DC200-one 78.one 26.97 14.35 31.eight 38.1 fifty seven.4 6 one hundred ten 150 a hundred and seventy ten 132
DC250-one 78.one 26.ninety seven fourteen.35 31.8 38.1 57.4 6 a hundred thirty a hundred and eighty 220 ten 132
WH82 78.one 25.four 14.29 32 31.eight fifty seven 6.four 155 235 265 14 one hundred.one
DC400.01 78.1 twenty five.4 14.29 32 31.8 fifty seven 6.four one hundred sixty 320 350 14 one hundred.1
DC315.01 a hundred and one.six 36.5 19.05 38.1 forty one.28 sixty nine.nine 9.five a hundred sixty five 235 265 fourteen 300
DC320-1 one zero one.6 31.seventy five 19.05 38.one 41.28 sixty six.9 eight one hundred fifty one hundred ninety 270 twelve 300
DC40W.01 a hundred and one.6 36.five 19.05 38.1 forty one.28 sixty nine.nine 9.5 a hundred and seventy 280 310 14 300
DC400-one a hundred and one.six 31.seventy five 19.05 38.1 forty one.28 sixty nine.9 9.5 one hundred seventy 290 330 12 300
DC500-1 153.sixty seven forty four.forty five twenty five.four 50.eight fifty nine 91.2 ten 230 370 430 fourteen 356
DC500-one-A 153.67 44.45 twenty five.four 50.eight sixty six ninety eight 10 230 370 430 14 356
DC500×254-1 153.sixty seven 44.forty five 25.4 fifty.eight fifty nine 91.two 10 224 374 434 fourteen 356
WH132-498 153.67 forty four.forty five twenty five.05 50.8 seventy six.2 111.8 twelve.seven 201.4 441.4 498 13 378.1
DC630-one 153.sixty seven forty four.45 25.4 50.8 66 98 ten 230 500 560 fourteen 356
DC660×254-1 153.67 44.forty five twenty five.four fifty.8 sixty six 102 12 224 534 594 14 511
DC630×254-1 153.sixty seven 44.45 twenty five.four fifty.8 66 102 12 224 504 564 14 511
DC800-one 153.sixty seven forty four.45 twenty five.4 50.8 sixty eight 104 12 230 450/670 730 fourteen 511
DC800×356-1 153.67 forty four.45 28.75 sixty 73 109 twelve 226 450/674 734 fourteen 543
DC1016-one 153.sixty seven 44.45 28.seventy five 60 73 109 12 230 560/890 950 14 543    

Chain No. Pitch P (mm) Outer diameter of bushing d1 (mm) Diameter of pin d2 (max) (mm) Height of sidebar h2 (max) (mm) Internal width among small finishes b1 (mm) Outer width between small finishes b2 (mm) Thickness of sidebar T (mm) Dimension of scraper Tensile strength Q (min) (KN)
L1 (mm) L2 (mm) L3 (mm) D (mm)
DC400×203-one one zero one.6 31.seventy five 19.05 38.1 41.28 69.9 9.5 154 294 334 twelve 300
WH130×400 153.sixty seven 44.forty five 25.2 fifty.eight 76.2 111.eight twelve.seven 230 350 four hundred 14 378.1
DC500×254 153.67 forty four.forty five 25.4 fifty.eight fifty nine ninety one.2 ten 224 374 434 14 356
DC630×254 153.67 44.45 25.4 fifty.eight sixty six 102 12 224 504 564 14 511
DC660×254 153.sixty seven forty four.forty five twenty five.four 50.eight 66 102 12 224 534 594 13 511
DC762×254 153.sixty seven 44.forty five 28.seventy five fifty.eight seventy three 109 twelve 226 636 696 14 543
DC800×254 153.67 forty four.45 28.seventy five 60 73 109 twelve 226 450/674 734 14 543
DC1016-one 153.sixty seven 44.45 28.75 sixty 73 109 twelve 230 560/890 950 14 543

Chain No. Pitch P (mm) Outer diameter of bushing d1 (mm) Diameter of pin d2 (max) (mm) Peak of sidebar h2 (max) (mm) Internal width in between modest ends b1 (mm) Outer width between modest finishes b2 (mm) Thickness of sidebar T (mm) Dimension of scraper Tensile energy Q (min) (KN)
L1 (mm) L2 (mm) L3 (mm) D (mm)
WH150 153.67 forty four.45 28.fifty seven 63.five seventy three 111.76 12.seven 163.4 193.4 240 18 542

For more than 20 a long time, we have concentrated on custom made chains.

For much more than twenty several years, We have carried out hundreds of various varieties of industrial chains.

So we have a wealth of customized chain knowledge.

Here are some of the kinds of the chains.

 

Drag Industrial Standard Roller Narrow Series Welded Steel Transmission Chain

TAGs: