We – EPG Group the most significant Chain and agricultural gearbox factory in China with 5 diverse branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Our products are applied in a lot of fields.Regular With numerous years’ knowledge in this line, we will be reliable by our advantages in competitive cost, one particular-time shipping and delivery, prompt reaction, on-hand engineering help and good right after-income solutions.Moreover, all our manufacturing processes are in compliance with ISO9001 expectations. solitary-strand roller chain, standardized by ASME, is an assembly of alternating pin back links and roller hyperlinks. The length amongst pin facilities is called the pitch. The pitch is what categorizes the dimension of the chain. The bigger the pitch, the higher the load ranking. Chains with little pitches carry more compact hundreds, run a lot more quietly, and at larger speeds. Multi-strand, little-pitch roller chains are a very good remedy for higher-load, high-speed purposes. We seem forward to the opportunity to provide you and hope to insert you to our increasing loved ones of content consumers.
INTRODUCTION
Offset Url Chain for Sugar Industry
The offset link chain is made with substantial abrasion, effect, and corrosion resistance to meet the application
needs in sugar generating industry. Its aspect plates are bended but with paralleled ends. The two very hot bending and
chilly bending strategies can be used for side plate processing. The adoption of innovative bending die, coupled
with improved good quality inspection, tends to make certain the bending of facet plates arrives with out cracks. As a result, the
offset sidebar chain is not going to break very easily beneath large load problems.
Produced employing stainless metal and alloy metal materials, our offset link chain for sugar sector gives least
tensile energy choices among 250 and 900KN, and rated doing work load choices from18 to 85KN.
DC 2184 DC 8184 DC C2614 DC 09063 all avaliable
Chain No. | Pitch P (mm) | Inner width of narrow end b1 (min.) (mm) | Outer diameter of roller (bushing) D (max.) (mm) | Pin | Sidebar | Min. tensile toughness Q (min) (KN) | Rated working load (KN) | Weight for every meter q (kg/m) | |||
d (mm) | L1 (mm) | L2 (mm) | h (mm) | T (mm) | |||||||
*#SS100D | a hundred | 33.27 | 33.27 | 17.27 | 38.4 | 48.six | forty four.5 | eight | 200 | 17.8 | ten.47 |
DC 1125 | one zero one.6 | 32.six | 50.eight | seventeen.5 | 37.nine | forty five | fifty.eight | seven.9 | 210 | 18.26 | |
*DC D2184 | 152.4 | 34.9 | seventy six.two | 22.23 | forty three.9 | fifty one.two | 50.eight | nine.5 | 355.six | 31.6 | 17.7 |
DC W1796 | 152.four | 37.eight | 69.85 | 22.23 | 44.two | fifty two.9 | fifty seven.2 | 9.five | 444.5 | 31.6 | 18.fifty nine |
DC 09063 | 152.four | 38 | seventy six.2 | 23.83 | 47.one | 54.9 | 60.3 | ten.3 | 622.three | 36.one | 21.83 |
DC 8184 | 203.two | forty five.nine | 88.nine | 25.4 | fifty nine.seven | sixty five.eight | 69.9 | 12.7 | 742.four | 47.six | 29.two |
DC C2614 | 304.eight | 69.eighty five | 63.five | 31.75 | seventy eight.five | eighty four.5 | 88.9 | 15.9 | one thousand | eighty four.five | 33.sixty eight |
The use of authentic gear manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the detailed replacement areas contained herein are not sponsored, accepted, or created by the OEM.