PGRH Sequence
Goods Characteristics:
(1) Minimal Sounds:Beneath 65db.
(two) Low Backlash:Backlash is under 3 arcmin . Backlash for two-phase pace reduction is with in five arcmin.
(three) High Performance:one-phase up to ninety five% or much more,2-stage up to ninety two% or more.
(4) High Enter Speed:Enter pace makes it possible for for up to 8000RPM.
(five) High Torque:High torque output than that of traditional planetary equipment reducers
(6) Maintenance-Totally free:Lower grease use,can be lifetime lubrication
(7) High Pace Reduction Ratio:Pace ratio is over one/one thousand.
Gain:
Utilization:
- Aerospace,navy business.
- Healthcare wellness,electronic info market.
- YWIN robots,Generation automation,CNC machine tool manufacturing sector.
- Motor,Textile,Printing,Meals,YWINlurgical.
- Environmental safety engineering,Warehouse logistics sector.
Design ILLUMINATE:
Equipment BOX Performance Data:
| MODUL NO. | Stage | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
| Rated output torque T2N | Nm | 1 | three | 20 | 55 | 130 | 208 | 342 | 588 | one,140 |
| 4 | 19 | 50 | 140 | 290 | 542 | 1,050 | 1,700 | |||
| five | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
| 6 | 20 | 55 | 150 | 310 | 600 | 1,100 | one,900 | |||
| seven | 19 | 35 | 140 | 300 | 550 | 1,100 | one,800 | |||
| eight | 17 | 35 | 120 | 260 | 500 | 1,000 | 1,600 | |||
| ten | 14 | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
| fourteen | – | 35 | 140 | 300 | 550 | one,100 | 1,800 | |||
| 20 | – | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
| 2 | 15 | 20 | 50 | 130 | 208 | 342 | 588 | 1,140 | ||
| 20 | 19 | 60 | 140 | 290 | 542 | one,050 | one,700 | |||
| twenty five | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| 30 | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| 35 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 40 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
| 50 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 60 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 70 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 80 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 100 | 22 | 60 | 95 | 220 | 370 | 800 | one,220 | |||
| a hundred and twenty | – | – | 150 | 310 | 600 | 1,100 | one,900 | |||
| one hundred forty | – | – | 140 | 300 | 550 | 1,100 | 1,800 | |||
| 160 | – | – | 120 | 260 | 500 | 1,000 | 1,600 | |||
| 200 | – | – | 48 | 140 | 370 | 520 | 1,220 | |||
| MAX. output torqueT2B | Nm | one,two | 3~200 | 3 times of Nominal Output Torque | ||||||
| Rated input speed n1 | rpm | 1,two | three~two hundred | 5,000 | 5,000 | 4,000 | 4,000 | 3,000 | 3,000 | 2,000 |
| MAX.input speed n1B | rpm | one,two | three~200 | 10,000 | ten,000 | 8,000 | 8,000 | 6,000 | six,000 | four,000 |
| Micro Backlash P0 | arcmin | one | three~twenty | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
| 2 | 15~200 | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
| YWIN Backlash P1 | arcmin | one | three~20 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
| two | 15~200 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| YWIN Backlash P2 | arcmin | 1 | three~20 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
| two | fifteen~two hundred | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
| Torsional stiffness | Nm/arcmin | 1,2 | three~200 | 3 | seven | fourteen | twenty five | 50 | one hundred forty five | 225 |
| Max.radial force F2rB² | N | one,two | 3~two hundred | 780 | 1,530 | three,250 | six,700 | nine,400 | 14,500 | fifty,000 |
| MAX.axial force F2a1B² | N | 1,2 | 3~two hundred | 350 | 630 | 1,300 | three,000 | 4,000 | six,200 | 35,000 |
| MAX.axial force F2a2B² | N | 1,2 | 3~200 | 390 | 765 | one,625 | three,350 | 4,700 | seven,250 | twenty five,000 |
| Service life | hr | 1,two | three~two hundred | twenty,000* | ||||||
| Work efficiency η | % | one | three~twenty | ≥97 | ||||||
| 2 | 15~two hundred | ≥94 | ||||||||
| Fat | kg | 1 | three~twenty | .9 | two.one | six.4 | 13 | 24.5 | 51 | 83 |
| 2 | fifteen~200 | 1.2 | 1.five | seven.8 | 14.2 | 27.five | 54 | ninety five | ||
| Operating temperature | ºC | one,two | 3~two hundred | -10ºC~+90ºC | ||||||
| Lubrication | 1,two | 3~200 | Synthetic lubricating oil | |||||||
| Protection level | 1,2 | 3~two hundred | IP65 | |||||||
| Installation direction | 1,two | three~two hundred | Any direction | |||||||
| Noise level(n1=3000rpm) | dB | 1,2 | three~two hundred | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
Outline DIMENSION:
Organization See:
Montreal YWIN Mechanical & Electrical Co., Ltd. is a subsidiary of Quebec Jun Yi YWINry. Jun Yi YWINry was launched in March 1972. The organization specializes in the design, growth and manufacturing of large-tech different geared motors and helical equipment reducers, worm and worm gear reducers and planetary reducers. Our products sold to a lot more than 30 nations around the world about the world and get good reputation and numerous awards in the overseas market for a lot of many years. In latest many years, to accomplish world-wide generation and give superb support,we set up subsidiary of manufacturing of planetary equipment reducer in China.
History:
1972:Quebec Jun Yi YWINry is founded.
1989:It proven a overseas branch organization ATRUMP YWIN INC in Los Angeles
1995:Pass the ISO9002 Commodity certification.
2003:Pass the ISO9001 quality certification and the European CE common test which enabled the merchandise to be bought in Europe
2013:The business established up subsidiary in China to achieve worldwide generation.
Factory:
Knowledge Manufactured In ATG,Knowledge The Entire world.
Equipment:
INSPECTION Products:
FAQ:
(1) Can I be your agent?
Of course, welcome to deep cooperation. We have large marketing of ATG manufacturer in the market place now. For the particulars make sure you make contact with me.
(two) Is OEM accessible?
Yes, OEM is offered. We have specialist designer to support your brand name promotion.
(three) How can I get a sample to verify your good quality?
Following price affirmation, you can call for for samples to check out our high quality. Free for the samples, but you require to shell out for the freight.
(4)What is your high quality guarantee?
We have distinct varieties of items which can meet up with distinct top quality common.
Our QC section will examination merchandise just before shipping. We have one hundred% high quality ensure to buyers. We will be accountable for any good quality issue.
(5) How about the supply time?
The shipping time is based on the items and the amount. But typically, the shipping time for a container is about one particular thirty day period.
Welcome to our firm.
If any difficulty, truly feel cost-free to go away concept on the base of this webpage.
