PGRH Sequence
Items Features:
(one) Lower Sound:Below 65db.
(2) Low Backlash:Backlash is below 3 arcmin . Backlash for 2-phase pace reduction is with in five arcmin.
(3) High Performance:one-phase up to ninety five% or a lot more,2-stage up to ninety two% or far more.
(4) High Input Speed:Input pace allows for up to 8000RPM.
(five) High Torque:Higher torque output than that of typical planetary gear reducers
(6) Maintenance-Totally free:Low grease dress in,can be lifetime lubrication
(seven) High Pace Reduction Ratio:Speed ratio is above 1/one thousand.
Edge:
Use:
- Aerospace,navy sector.
- Healthcare wellness,electronic details market.
- YWIN robots,Generation automation,CNC machine resource production sector.
- Motor,Textile,Printing,Foods,YWINlurgical.
- Environmental defense engineering,Warehouse logistics industry.
Model ILLUMINATE:
Equipment BOX Efficiency Details:
| MODUL NO. | Stage | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
| Rated output torque T2N | Nm | 1 | three | 20 | 55 | 130 | 208 | 342 | 588 | 1,140 |
| 4 | 19 | 50 | 140 | 290 | 542 | 1,050 | one,700 | |||
| 5 | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| six | 20 | 55 | 150 | 310 | 600 | one,100 | one,900 | |||
| seven | 19 | 35 | 140 | 300 | 550 | 1,100 | 1,800 | |||
| 8 | 17 | 35 | 120 | 260 | 500 | 1,000 | one,600 | |||
| 10 | 14 | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
| fourteen | – | 35 | 140 | 300 | 550 | 1,100 | 1,800 | |||
| twenty | – | 37 | 95 | 220 | 370 | 800 | one,220 | |||
| 2 | fifteen | 20 | 50 | 130 | 208 | 342 | 588 | 1,140 | ||
| 20 | 19 | 60 | 140 | 290 | 542 | one,050 | one,700 | |||
| 25 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| thirty | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| 35 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| forty | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| 50 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 60 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 70 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| eighty | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
| a hundred | 22 | 60 | 95 | 220 | 370 | 800 | one,220 | |||
| 120 | – | – | 150 | 310 | 600 | 1,100 | 1,900 | |||
| one hundred forty | – | – | 140 | 300 | 550 | one,100 | one,800 | |||
| 160 | – | – | 120 | 260 | 500 | one,000 | one,600 | |||
| 200 | – | – | 48 | 140 | 370 | 520 | 1,220 | |||
| MAX. output torqueT2B | Nm | one,two | three~200 | 3 times of Nominal Output Torque | ||||||
| Rated input speed n1 | rpm | 1,two | three~two hundred | five,000 | five,000 | four,000 | four,000 | 3,000 | 3,000 | 2,000 |
| MAX.input speed n1B | rpm | 1,two | 3~two hundred | ten,000 | 10,000 | 8,000 | eight,000 | 6,000 | 6,000 | 4,000 |
| Micro Backlash P0 | arcmin | 1 | three~twenty | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
| 2 | 15~200 | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
| YWIN Backlash P1 | arcmin | 1 | three~twenty | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
| 2 | 15~200 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| YWIN Backlash P2 | arcmin | one | 3~20 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
| 2 | 15~200 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
| Torsional stiffness | Nm/arcmin | one,2 | 3~200 | 3 | 7 | 14 | twenty five | 50 | one hundred forty five | 225 |
| Max.radial force F2rB² | N | one,two | three~two hundred | 780 | one,530 | 3,250 | 6,700 | nine,400 | 14,500 | 50,000 |
| MAX.axial force F2a1B² | N | 1,2 | 3~200 | 350 | 630 | one,300 | three,000 | four,000 | 6,200 | 35,000 |
| MAX.axial force F2a2B² | N | one,two | three~200 | 390 | 765 | 1,625 | three,350 | four,700 | 7,250 | twenty five,000 |
| Service life | hr | one,2 | 3~two hundred | twenty,000* | ||||||
| Work efficiency η | % | one | 3~twenty | ≥97 | ||||||
| two | 15~200 | ≥94 | ||||||||
| Excess weight | kg | 1 | three~20 | .nine | two.1 | 6.four | 13 | 24.5 | fifty one | eighty three |
| 2 | fifteen~200 | 1.two | 1.5 | 7.8 | 14.two | 27.five | 54 | ninety five | ||
| Operating temperature | ºC | 1,2 | 3~200 | -10ºC~+90ºC | ||||||
| Lubrication | 1,two | three~two hundred | Synthetic lubricating oil | |||||||
| Protection level | one,2 | three~two hundred | IP65 | |||||||
| Installation direction | 1,two | 3~two hundred | Any direction | |||||||
| Noise level(n1=3000rpm) | dB | one,2 | 3~two hundred | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
Outline DIMENSION:
Organization Look at:
Montreal YWIN Mechanical & Electrical Co., Ltd. is a subsidiary of Quebec Jun Yi YWINry. Jun Yi YWINry was launched in March 1972. The organization specializes in the design, advancement and production of higher-tech various geared motors and helical gear reducers, worm and worm equipment reducers and planetary reducers. Our items offered to a lot more than 30 countries all around the world and earn excellent reputation and numerous awards in the overseas market for many a long time. In latest a long time, to accomplish worldwide generation and offer excellent support,we set up subsidiary of generation of planetary equipment reducer in China.
History:
1972:Quebec Jun Yi YWINry is founded.
1989:It recognized a overseas branch company ATRUMP YWIN INC in Los Angeles
1995:Go the ISO9002 Commodity certification.
2003:Pass the ISO9001 top quality certification and the European CE regular test which enabled the products to be bought in Europe
2013:The company set up subsidiary in China to attain worldwide production.
Factory:
Knowledge Produced In ATG,Wisdom The Planet.
Gear:
INSPECTION Gear:
FAQ:
(1) Can I be your agent?
Of course, welcome to deep cooperation. We have massive promotion of ATG model in the market place now. For the particulars please speak to me.
(2) Is OEM offered?
Sure, OEM is offered. We have professional designer to assist your model advertising.
(three) How can I get a sample to check your quality?
Right after price confirmation, you can demand for samples to examine our high quality. Free for the samples, but you want to shell out for the freight.
(4)What is your high quality assure?
We have diverse types of goods which can fulfill distinct top quality normal.
Our QC office will test merchandise just before shipping. We have a hundred% good quality assure to customers. We will be dependable for any top quality problem.
(5) How about the shipping and delivery time?
The shipping and delivery time is dependent on the products and the quantity. But typically, the shipping time for a container is about a single thirty day period.
Welcome to our business.
If any dilemma, come to feel free to go away concept on the bottom of this webpage.
