PGH SERERS
This high quality variety helical equipment planetary gear reducer is offering 3 precision levels and 7 body sizes to decide on.They are completely ready for most sector and motion handle apps.Square mounting flange,caged premium class helical planetary gears in an inline housing by way of sizes 220mm.Higher torque capability,silent procedure with backlash as minimal as <1 arcmin.Ratios 3:1 to 100:1.It is the best power transmission component for the YWIN Robots,Semiconductor Devices,Automatic storage system,etc.
Merchandise Characteristics:
(1) Minimal Sound:Under 65db.
(2) Low Backlash:Backlash is underneath 3 arcmin . Backlash for two-stage pace reduction is with in 5 arcmin.
(3) High Effectiveness:one-stage up to ninety five% or far more,2-phase up to 92% or much more.
(four) High Input Speed:Enter speed allows for up to 8000RPM.
(5) High Torque:Substantial torque output than that of conventional planetary gear reducers
(6) Maintenance-Cost-free:Minimal grease use,can be lifetime lubrication
(7) High Velocity Reduction Ratio:Velocity ratio is above 1/a thousand.
Gain:
Utilization:
- Aerospace,army industry.
- Health care well being,digital information market.
- YWIN robots,Generation automation,CNC device resource producing sector.
- Motor,Textile,Printing,Meals,YWINlurgical.
- Environmental safety engineering,Warehouse logistics sector.
Model ILLUMINATE:
Equipment BOX Performance Information:
MODUL NO. | Stage | RATIO¹ | PGH42 | PGH60 | PGH90 | PGH115 | PGH142 | PGH180 | PGH220 | |
Rated output torque T2N | Nm | one | 3 | 20 | 55 | 130 | 208 | 342 | 588 | 1,140 |
4 | 19 | 50 | 140 | 290 | 542 | 1,050 | 1,700 | |||
five | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
6 | 20 | 55 | 150 | 310 | 600 | one,100 | one,900 | |||
seven | 19 | 35 | 140 | 300 | 550 | one,100 | 1,800 | |||
eight | 17 | 37 | 120 | 260 | 500 | 1,000 | 1,600 | |||
ten | 14 | 55 | 95 | 220 | 370 | 800 | 1,220 | |||
two | twelve | 20 | 55 | 130 | 208 | 342 | 588 | one,140 | ||
15 | 20 | 50 | 130 | 208 | 342 | 588 | 1,140 | |||
20 | 19 | 60 | 140 | 290 | 542 | 1,050 | 1,700 | |||
25 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
30 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
35 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
40 | 22 | 60 | 160 | 330 | 650 | one,200 | 2,000 | |||
50 | 22 | 60 | 160 | 330 | 650 | 1,200 | two,000 | |||
sixty | 20 | 55 | 150 | 310 | 600 | 1,100 | one,900 | |||
70 | 19 | 35 | 140 | 300 | 50 | one,100 | one,800 | |||
80 | 17 | 35 | 120 | 260 | 500 | 1,000 | one,600 | |||
a hundred | 14 | 37 | 95 | 220 | 370 | 800 | one,220 | |||
MAX. output torqueT2B | Nm | one,2 | three~a hundred | 3 times of Nominal Output Torque | ||||||
Rated input speed n1 | rpm | one,two | three~100 | 5,000 | five,000 | four,000 | four,000 | three,000 | 3,000 | 2,000 |
MAX.input speed n1B | rpm | 1,two | three~one hundred | ten,000 | 10,000 | eight,000 | eight,000 | 6,000 | six,000 | four,000 |
Micro Backlash P0 | arcmin | one | three~10 | – | – | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
two | 12~a hundred | – | – | – | ≤3 | ≤3 | ≤3 | ≤3 | ||
YWIN Backlash P1 | arcmin | one | three~10 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 |
two | 12~one hundred | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ||
YWIN Backlash P2 | arcmin | 1 | 3~ten | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 |
2 | 12~a hundred | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
Torsional stiffness | Nm/arcmin | 1,two | three~a hundred | 3 | 7 | 14 | 25 | 50 | 145 | 225 |
Max.radial force F2rB² | N | one,2 | 3~one hundred | 780 | 1,530 | 3,250 | six,700 | 9,400 | 14,500 | 50,000 |
MAX.axial force F2a1B² | N | 1,2 | three~a hundred | 350 | ||||||
MAX.axial force F2a2B² | N | 1,two | three~a hundred | 390 | ||||||
1,2 | 3~one hundred | 20,000* | ||||||||
Work efficiency η | % | one | three~10 | ≥97 | ||||||
two | twelve~100 | ≥94 | ||||||||
Fat | kg | 1 | three~10 | .5 | ||||||
2 | 12~100 | .eight | ||||||||
Operating temperature | ºC | 1,2 | three~a hundred | -10ºC~+90ºC | ||||||
Lubrication | 1,2 | 3~a hundred | Synthetic lubricating oil | |||||||
Protection level | one,two | three~100 | IP65 | |||||||
Installation direction | 1,2 | three~a hundred | Any direction | |||||||
Noise level(n1=3000rpm) | dB | 1,2 | 3~one hundred | ≤56 | ≤58 | ≤60 | ≤63 | ≤65 | ≤67 | ≤70 |
Define DIMENSION:
Firm Check out:
Montreal YWIN Mechanical & Electrical Co., Ltd. is a subsidiary of Quebec Jun Yi YWINry. Jun Yi YWINry was established in March 1972. The organization specializes in the design and style, development and generation of large-tech various geared motors and helical equipment reducers, worm and worm gear reducers and planetary reducers. Our products marketed to much more than 30 nations about the world and acquire excellent reputation and numerous awards in the overseas market for several many years. In latest several years, to achieve international production and give excellent support,we set up subsidiary of creation of planetary equipment reducer in China.
Historical past:
1972:Quebec Jun Yi YWINry is founded.
1989:It recognized a overseas branch firm ATRUMP YWIN INC in Los Angeles
1995:Go the ISO9002 Commodity certification.
2003:Pass the ISO9001 good quality certification and the European CE standard test which enabled the merchandise to be bought in Europe
2013:The organization set up subsidiary in China to achieve worldwide production.
Manufacturing unit:
Knowledge Made In ATG,Wisdom The Globe.
Equipment:
INSPECTION Equipment:
FAQ:
(one) Can I be your agent?
Of course, welcome to deep cooperation. We have huge marketing of ATG brand in the marketplace now. For the information please get in touch with me.
(2) Is OEM available?
Sure, OEM is accessible. We have skilled designer to assist your brand name marketing.
(three) How can I get a sample to verify your quality?
Following value confirmation, you can call for for samples to verify our good quality. Totally free for the samples, but you want to pay for the freight.
(4)What is your good quality assure?
We have distinct types of goods which can fulfill distinct quality common.
Our QC section will take a look at merchandise ahead of shipping. We have 100% top quality ensure to buyers. We will be liable for any quality dilemma.
(five) How about the shipping and delivery time?
The delivery time is based on the goods and the amount. But normally, the supply time for a container is about one particular month.
Welcome to our organization.
If any dilemma, come to feel totally free to go away concept on the base of this webpage.