PGRH Sequence
Products Attributes:
(one) Minimal Sound:Below 65db.
(two) Low Backlash:Backlash is below 3 arcmin . Backlash for two-stage speed reduction is with in 5 arcmin.
(three) High Effectiveness:1-phase up to ninety five% or far more,two-phase up to 92% or much more.
(four) High Enter Speed:Enter pace allows for up to 8000RPM.
(five) High Torque:Higher torque output than that of traditional planetary equipment reducers
(6) Maintenance-Totally free:Reduced grease wear,can be lifetime lubrication
(seven) High Speed Reduction Ratio:Velocity ratio is in excess of one/one thousand.
Advantage:
Utilization:
- Aerospace,navy sector.
- Health care health,digital data business.
- YWIN robots,Manufacturing automation,CNC equipment device manufacturing business.
- Motor,Textile,Printing,Foods,YWINlurgical.
- Environmental defense engineering,Warehouse logistics business.
Design ILLUMINATE:
Equipment BOX Functionality Information:
| MODUL NO. | Phase | RATIO¹ | PGRH42 | PGRH60 | PGRH90 | PGRH115 | PGRH142 | PGRH180 | PGRH220 | |
| Rated output torque T2N | Nm | 1 | 3 | 20 | 55 | 130 | 208 | 342 | 588 | 1,140 |
| four | 19 | 50 | 140 | 290 | 542 | one,050 | one,700 | |||
| five | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 6 | 20 | 55 | 150 | 310 | 600 | 1,100 | one,900 | |||
| seven | 19 | 35 | 140 | 300 | 550 | one,100 | one,800 | |||
| eight | 17 | 35 | 120 | 260 | 500 | 1,000 | 1,600 | |||
| ten | 14 | 37 | 95 | 220 | 370 | 800 | one,220 | |||
| fourteen | – | 35 | 140 | 300 | 550 | 1,100 | 1,800 | |||
| twenty | – | 37 | 95 | 220 | 370 | 800 | 1,220 | |||
| 2 | 15 | 20 | 50 | 130 | 208 | 342 | 588 | one,140 | ||
| 20 | 19 | 60 | 140 | 290 | 542 | 1,050 | one,700 | |||
| 25 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 30 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 35 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| forty | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 50 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 60 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| 70 | 22 | 60 | 160 | 330 | 650 | 1,200 | 2,000 | |||
| 80 | 22 | 60 | 160 | 330 | 650 | one,200 | two,000 | |||
| a hundred | 22 | 60 | 95 | 220 | 370 | 800 | 1,220 | |||
| 120 | – | – | 150 | 310 | 600 | 1,100 | 1,900 | |||
| 140 | – | – | 140 | 300 | 550 | one,100 | 1,800 | |||
| 160 | – | – | 120 | 260 | 500 | 1,000 | 1,600 | |||
| 200 | – | – | 48 | 140 | 370 | 520 | 1,220 | |||
| MAX. output torqueT2B | Nm | 1,two | 3~two hundred | 3 times of Nominal Output Torque | ||||||
| Rated input speed n1 | rpm | 1,2 | 3~two hundred | five,000 | five,000 | 4,000 | four,000 | 3,000 | three,000 | two,000 |
| MAX.input speed n1B | rpm | 1,two | three~two hundred | ten,000 | ten,000 | eight,000 | eight,000 | 6,000 | six,000 | four,000 |
| Micro Backlash P0 | arcmin | one | 3~twenty | – | – | ≤2 | ≤2 | ≤2 | ≤2 | ≤2 |
| two | 15~200 | – | – | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ||
| YWIN Backlash P1 | arcmin | 1 | 3~twenty | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 | ≤4 |
| 2 | fifteen~200 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
| YWIN Backlash P2 | arcmin | one | 3~20 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 | ≤6 |
| two | fifteen~two hundred | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ≤9 | ||
| Torsional stiffness | Nm/arcmin | one,2 | three~200 | three | seven | fourteen | 25 | 50 | one hundred forty five | 225 |
| Max.radial force F2rB² | N | one,2 | 3~two hundred | 780 | one,530 | 3,250 | 6,700 | nine,400 | 14,500 | 50,000 |
| MAX.axial force F2a1B² | N | one,two | three~two hundred | 350 | 630 | one,300 | three,000 | four,000 | six,200 | 35,000 |
| MAX.axial force F2a2B² | N | one,two | three~two hundred | 390 | 765 | one,625 | 3,350 | four,700 | seven,250 | twenty five,000 |
| Service life | hr | one,two | 3~two hundred | twenty,000* | ||||||
| Work efficiency η | % | one | three~20 | ≥97 | ||||||
| 2 | 15~200 | ≥94 | ||||||||
| Bodyweight | kg | 1 | three~twenty | .9 | two.one | 6.4 | 13 | 24.five | 51 | eighty three |
| two | 15~two hundred | one.two | 1.five | seven.8 | fourteen.2 | 27.five | fifty four | 95 | ||
| Operating temperature | ºC | 1,two | 3~two hundred | -10ºC~+90ºC | ||||||
| Lubrication | 1,2 | three~two hundred | Synthetic lubricating oil | |||||||
| Protection level | one,2 | 3~two hundred | IP65 | |||||||
| Installation direction | one,two | three~200 | Any direction | |||||||
| Noise level(n1=3000rpm) | dB | 1,two | 3~200 | ≤61 | ≤63 | ≤65 | ≤68 | ≤70 | ≤72 | ≤74 |
Outline DIMENSION:
Business Look at:
Montreal YWIN Mechanical & Electrical Co., Ltd. is a subsidiary of Quebec Jun Yi YWINry. Jun Yi YWINry was founded in March 1972. The business specializes in the layout, development and production of large-tech various geared motors and helical equipment reducers, worm and worm gear reducers and planetary reducers. Our goods sold to much more than 30 countries all around the world and win excellent reputation and numerous awards in the overseas market for numerous several years. In current years, to attain worldwide production and supply excellent provider,we set up subsidiary of generation of planetary gear reducer in China.
Heritage:
1972:Quebec Jun Yi YWINry is founded.
1989:It recognized a overseas branch company ATRUMP YWIN INC in Los Angeles
1995:Pass the ISO9002 Commodity certification.
2003:Pass the ISO9001 high quality certification and the European CE regular test which enabled the products to be offered in Europe
2013:The business established up subsidiary in China to accomplish international generation.
Manufacturing facility:
Wisdom Made In ATG,Wisdom The Globe.
Gear:
INSPECTION Products:
FAQ:
(one) Can I be your agent?
Indeed, welcome to deep cooperation. We have large marketing of ATG brand name in the market place now. For the specifics make sure you speak to me.
(2) Is OEM accessible?
Indeed, OEM is accessible. We have expert designer to aid your model promotion.
(three) How can I get a sample to check out your high quality?
Right after price tag confirmation, you can call for for samples to verify our top quality. Free for the samples, but you want to spend for the freight.
(4)What’s your high quality ensure?
We have various sorts of items which can meet up with various top quality standard.
Our QC office will take a look at items before shipping. We have one hundred% good quality ensure to buyers. We will be responsible for any good quality difficulty.
(five) How about the shipping time?
The delivery time is depending on the products and the quantity. But usually, the shipping and delivery time for a container is about one particular month.
Welcome to our company.
If any issue, really feel cost-free to go away concept on the base of this webpage.
