ATA Series Shaft Mounted Gear Reducer with Torque Arm
Components:
one. Housing: Nodular Solid Iron(Ductile Iron) QT600
two. Gears Profile: Hardened Helical Gears
three. Gears Materials: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface area Hardness: HRC58-sixty two, Interior Hardness: HBS156-207
six. Gears Precision: 6 Class
seven. Shafts Substance: 40Cr
eight. Enter Configurations:
Keyed Strong Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
ten. Oil Seal: Quebec SOG
eleven. Bearings: NSK, SKF, , HRB, ZWZ, LYC
twelve. Spare Components: Torque arm, Optional Backstop
The functions of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Solitary key hollow shaft, every design can pick three hollow diameter at most.
YWIN Housing: Tough Iron Steel, can be used outside.
Anti-slip unit: Can fit for any design, It’s very handy to be mounted.
The upkeep of ATA shaft mounted gearbox:
1. Just before starting up the reducer should be loaded of N159 or N220 severe force industrial gear oils, until the gearbox oil shows an intermediate place
two. Following a few months operating, the gearbox need to have to alter oil, attention it need to be debris inside the machine rinse ahead of adding new oil.
three. At the reducer hollow shaft ends and travel pulley end gland plate have to fastened with locking screws.
4. The reducer pulley and the motor pulley must be parallel when they are put in and the belt tightness ought to be moderate.
Rated Power |
one.1~193KW |
Intput Speed |
five hundred~1400r/min |
Output Velocity |
twenty five~300r/min |
Ratio |
IN=five….31.5 |
Installation Type |
Shaft mounted |
The models of ATA shafted mounted gearbox:
one Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
two Phase: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D
YWIN Parameters:
Types | Output Bore Dia. | Highest Torque | Nominal Ratio(i) |
ATA30 | 30mm | 180Nm | five
7 ten 12.five fifteen twenty twenty five 31 |
ATA35 | 35mm | 420Nm | |
ATA40 | 40mm/45mm | 950Nm | |
ATA45 | 45mm/50mm/55mm | 1400Nm | |
ATA50 | 50mm/55mm/60mm | 2300Nm | |
ATA60 | 60mm/70mm | 3600Nm | |
ATA70 | 70mm/85mm | 5100Nm | |
ATA80 | 80mm/100mm | 7000Nm | |
ATA100 | 100mm/125mm | 11000Nm | |
ATA125 | 125mm/135mm | 17000Nm |
Merchandise images:
Product application:
Our firm :
AOKMAN® was founded in 1982, which has more than 36 a long time in R & D and manufacturing of gearboxes, gears, shaft, motor and spare areas.
We can offer you the correct solution for uncountable programs. Our goods are widely utilized in the ranges of metallurgical, steel, mining, pulp and paper, sugar and liquor marketplace and numerous other types of equipment with a strong existence in the worldwide market place.
AOKMAN® has become a reliable provider, in a position to provide higher high quality gearboxes.With 36 several years expertise, we guarantee you the utmost reliability and stability for both merchandise and services.
YWINer browsing:
Our Solutions:
Pre-sale services | one. Select gear product. |
two.Style and manufacture products in accordance to clients’ unique necessity. | |
three.Practice technological personal for customers | |
Solutions throughout offering | one.Pre-check out and accept products ahead of shipping and delivery. |
two. Help customers to draft resolving plans. | |
Right after-sale providers | one.Support clientele to prepare for the first building plan. |
2. Train the first-line operators. | |
3.Just take initiative to get rid of the difficulty swiftly. | |
four. Give technical exchanging. |
FAQ:
one.Q:What kinds of gearbox can you generate for us?
A:Main goods of our business: UDL sequence pace variator,RV collection worm equipment reducer, ATA sequence shaft mounted gearbox, X,B sequence gear reducer,
P sequence planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred types and countless numbers of technical specs
2.Q:Can you make as per custom drawing?
A: Yes, we provide custom-made services for buyers.
3.Q:What is your terms of payment ?
A: thirty% YWIN payment by T/T after signing the agreement.70% prior to shipping
4.Q:What is your MOQ?
A: 1 Set
If you have any demand for our items make sure you feel totally free to make contact with me