a hundred and fifty kg to three ton Ability Aluminum Shell Electrical Equipment Box Tilting Sort Smelting Induction Furnace
Software
This GW-JJ Sequence Smelting Electric Induction Furnace, aluminum shell mechanical tilt, is for melting forged metal, forged iron, stainless metal, copper, aluminum and other metals or its alloy. It can also be utilized jointly with self-heated furnaces and electrical arc furnace for heating or retaining heat/keeping the molten iron and molten steel.
It is particularly suited to modest and medium-dimension enterprises, or as YWIN YWIN Substance Check.
Electrical Characteristic:
one. Electronic CMOS chip (U. S. ASIC-two-twelve), with the greatest diploma of integration at property, is utilized in handle circuit, the general machine managed via 1 one panel
two. Frequency-sweep zero voltage start, high achievement charge, no shock
three. Computerized resistance adjustment, long term power output, ten-twenty% power saved in comparison with domestic traditional device of the kind
4. Car period sequence adaptation, free of synchronization
five. Good overall performance in reload staring, vehicle restoration
six. Hugely built-in in managing circuit, free of use of higher-charge starter and relay loop, relatively lower failure charge
seven. Wholly digital design and style, sturdy in anti-interference, no temperature change when in ongoing working
eight. Multi-safety features (for above existing, more than voltage, insufficient h2o pressure, electrical power failure, or section absence), and Montrealdling will not result in damage to device
Design explanation ( GW-1-750/1JJ for illustration
GW——–Aluminum Shell Smelting Electric powered Induction Furnace
-1——-Rated Ability 1 Ton (1000kg)
-750——-Rated Power 750Kw
/1——–1000Hz (1KHz)
-JJ——-Mechanical tilting (by electric motor and equipment)
Knowledge sheet for 10 kg to 5 ton Smelting Electric Induction Furnaces
Model | Enter Electricity | Input Volt. (6pulse) | Incoming Curr. | Rated Energy | DC Curr. | DC Volt. | Melting Charge | Working Freq. | Doing work Volt. | Rated Ability | Electricity Intake |
Kw | V | A | Kw | A | V | T/H | Hz | V | T | KWH/T | |
GW-.01-50/1JJ | sixty | 380 | seventy six | fifty | a hundred and forty | 400 | .06 | a thousand | 750 | .01 | 850 |
GW-.03-a hundred/1JJ | 100 | 380 | 160 | one hundred | 200 | five hundred | .09 | one thousand | 750 | .03 | 850 |
GW-.05-100/1JJ | one hundred | 380 | a hundred and sixty | 100 | 200 | 500 | .12 | a thousand | 750 | .05 | 800 |
GW-.08-one hundred/1JJ | 100 | 380 | 160 | a hundred | two hundred | five hundred | .12 | a thousand | 750 | .08 | 800 |
GW-.fifteen-a hundred/1JJ | one hundred | 380 | a hundred and sixty | a hundred | two hundred | five hundred | .15 | 1000 | 750 | .fifteen | 820 |
GW-.25-a hundred and sixty/1JJ | 180 | 380 | 256 | one hundred sixty | 320 | five hundred | .24 | 1000 | 750 | .twenty five | 790 |
GW-.5-250/1JJ | 280 | 380 | 400 | 250 | 500 | five hundred | .four | 1000 | 1500 | .5 | 770 |
GW-.75-400/1JJ | four hundred | 380 | 650 | four hundred | 800 | five hundred | .6 | one thousand | 1500 | .75 | 770 |
GW-one-five hundred/1JJ | 550 | 380 | 800 | five hundred | one thousand | 500 | .8 | a thousand | 1500 | 1 | 750 |
GW-one-750/1JJ | 800 | 380 | 1200 | 750 | 1500 | five hundred | .nine | one thousand | 1500 | one | 720 |
690 | 700 | 850 | 880 | five hundred | 2600 | 660 | |||||
GW-one.five-a thousand/.5JJ | 1100 | 690 | 912 | a thousand | 1140 | 880 | 1.two | five hundred | 2600 | 1.5 | seven-hundred |
GW-two-1500/.5JJ | 1650 | 690 | 1360 | 1500 | 1700 | 880 | one.seven | 500 | 2600 | two | 675 |
GW-2-2000/.5JJ | 2200 | 690 | 1400 | 2000 | 2275 | 880 | 1.nine | 500 | 2600 | 2 | 650 |
GW-3-2500/.5JJ | 2750 | 690 | 2275 | 2500 | 2840 | 880 | 2.56 | 500 | 2600 | 3 | 610 |
950 | 1700 | 2080 | 1250 | 3200 | 560 | ||||||
GW-five-4000/.5JJ | 4400 | 690 | 2300 | 4000 | 4540 | 880 | 4.five | 500 | 2600 | 5 | 550 |
950 | 2700 | 3330 | 1250 | 3200 | 500 |