Metal Drag chains are created for severely abrasive and very high-temp apps. For illustration, sizzling clinker and scorching lime drag conveyors that run up to 1000ºF levels. To supply better fatigue existence this series of chain is made with special warmth treated and induction hardened pins. To provide a greater sliding resistance, both sides of the chain have a bead of hard face weld.
Chain no. | Pitch P (mm) | Internal width of interior hyperlink b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Peak of sidebar h (mm) | Thickness of sidebar T (mm) | Width of scraper L (mm) | Peak of scraper h2 (mm) | Tensile energy Q (min) (KN) |
LTF665 | sixty six.five | 26.five | 22 | twelve | thirty | six | 164 | 30 | 130 |
LTF665 | sixty six.five | 26.five | 22 | 12 | 30 | six | a hundred and eighty | 30 | a hundred thirty |
LTF665 | 66.5 | 26.five | 22 | 12 | 30 | 6 | 225-265 | 30 | 130 |
LTF110 | 100 | 38.5 | 36 | 16 | 40 | six | 225-305 | 40 | 220 |
LTF1 one hundred ten | 100 | 29.6 | 22.three | 11.1 | 29 | five | 185 | 29 | ninety |
LS125 | 125 | 32.5 | 28.six | fourteen.3 | forty two | 6 | 235 | 42 | one hundred seventy |
LS125A | a hundred twenty five | 32 | 25 | 17 | 56 | 6 | 220 | fifty six | 220 |
LS125B | 125 | 32 | 36 | twenty | 60 | six | 290 | sixty | three hundred |
LS160 | 160 | fifty two | forty | 20 | 55 | nine.five | 470 | 55 | 378 |
LS160A | one hundred sixty | 52 | 40 | 20 | fifty five | 9.five | 580 | 55 | 378 |
LS160B | a hundred and sixty | forty five | 39.three | 22 | 60 | eight | 360 | 60 | 470 |
LS160C | a hundred and sixty | 36.8 | 36 | eighteen | 48 | eight | a hundred and sixty | 48 | 240 |
LS160D | a hundred and sixty | forty five | 39.three | 22 | sixty | six | 370 | sixty | 352 |
Chain no. | Pitch P (mm) | inner width of internal link b1(min) (mm) | diameter of roller d1(max) (mm) | diameter of pin d2 (mm) | peak of sidebar h (mm) | thickness of sidebar T (mm) | width of scraper L (mm) | height of scraper h2 (mm) | tensile toughness Q (min) (KN) |
M56-P63*218 | sixty three | 24 | 10 | 30 | 4 | 218 | thirty | fifty six | |
GLF66.5*160/4L | 66.5 | 26.five | 12.seven | thirty | six | one hundred sixty | 30 | 100 | |
GLF66.five(six)D*200 | sixty six.five | 26.5 | twelve.7 | thirty | six | 200 | thirty | a hundred | |
LTF665-164 | sixty six.5 | 26.5 | 22.23 | 12 | 30 | six | 164 | thirty | a hundred thirty |
LTF665-180 | sixty six.five | 26.5 | 22.23 | twelve | 30 | 6 | one hundred eighty | thirty | a hundred thirty |
LTF665-a hundred thirty | sixty six.5 | 26.five | 22.23 | twelve | 30 | six | one hundred thirty | thirty | one hundred thirty |
LTF665-225 | 66.five | 26.5 | 22.23 | twelve | thirty | 6 | 225 | thirty | 130 |
TGSS25A 3 | one hundred | 38 | 36 | sixteen | 40 | six | 232 | 40 | 123.5 |
DC1000ST000 | 100 | twenty five | 14 | 40 | five | 180 | 40 | 156 | |
P100*a hundred seventy five | 100 | twenty five | ten | thirty | five | 175 | thirty | 88 | |
GLF100(six)D*225 | 100 | 38 | 36 | 16 | forty | six | 225 | 40 | one hundred fifty |
GLF100(6)D*294 | a hundred | 38 | 36 | 16 | 40 | 6 | 294 | forty | a hundred and fifty |
LTF100 | 100 | 29.six | 22.23 | twelve | thirty | 6 | 185.six | 30 | 130 |
P110F2/2L | one hundred twenty five | 32 | fifteen.eighty five | 35 | 6 | 235 | 35 | one hundred seventy | |
P125-Idea-A | 125 | 30 | fifteen | 40 | five | a hundred and sixty | forty | 80 | |
DC1250ST005 | one hundred twenty five | 35 | 18 | fifty | six | two hundred | fifty | 176.four | |
DC1250ST006 | a hundred twenty five | 35 | eighteen | fifty | 6 | 250 | 50 | 176.four | |
DC1250ST007 | 125 | 35 | 18 | fifty | six | 300 | fifty | 176.four | |
DC1250ST 514 | a hundred twenty five | 30 | 16 | forty | six | 280 | 40 | 169 | |
DC1250ST011 | 125 | 25 | fourteen | 35 | 5 | 180 | 35 | 117 | |
M224-P125*385 | 125 | forty three | 21 | sixty | 8 | 385 | 60 | 224 | |
M224-P125*285 | 125 | forty three | 21 | 60 | eight | 285 | 60 | 224 | |
GSS630 | one hundred twenty five | fifty two | forty | 20 | 60 | ten | 590 | 60 | 274.four |
DC125OST012 | 125 | twenty five | 14 | forty | five | three hundred | forty | 156 | |
M112-P125*285 | 125 | 32 | fifteen | forty | 6 | 285 | forty | 112 | |
P125 | a hundred twenty five | 52 | forty four | 22 | sixty | ten | 445 | 60 | 376 |
GLF125(six)D*three hundred | one hundred twenty five | 32 | 18 | fifty | 6 | three hundred | 50 | a hundred ninety | |
FV90-P125-a hundred and seventy | a hundred twenty five | twenty five | fourteen | 35 | 5 | one hundred seventy | 35 | 90 | |
M112-P125*385 | a hundred twenty five | 32 | fifteen | 40 | 6 | 385 | forty | 112 | |
P150-Suggestion-A | one hundred fifty | 30 | 15 | 40 | five | 210 | forty | eighty | |
P160-Idea-A(I) | 160 | 30 | 15 | fifty | six | 265 | fifty | 140 | |
P160-Tip-A(II) | 160 | thirty | 15 | 45 | 6 | 265 | forty five | 112 | |
FV180-P160 | a hundred and sixty | forty five | 20 | fifty | eight | 390 | fifty | 160 | |
GLF160(B)D1385 | one hundred sixty | 36 | 36 | seventeen.8 | fifty | eight | 385 | 50 | 254 |
P200*825 | 200 | 20 | 25.4 | 63.five | twelve.seven | 825 | 63.5 |
Chain no. | Pitch P (mm) | Internal width of interior website link b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Height of sidebar h2 (mm) | Thickness of sidebar T (mm) | Width of scraper L (mm) | Tensile strength Q (min) (KN) |
DC101.six | one zero one.6 | 31.75 | 31.seventy five | fifteen.8 | 50 | 8 | 154 | 138 |
DC101.6 | one hundred and one.six | 31.seventy five | 40 | fifteen.eight | fifty | eight | 198 | 138 |
DC101.6P | a hundred and one.6 | 31.75 | forty | fifteen.eight | 50 | 8 | 279 | 138 |
DC152.four | 152.4 | 52 | forty | 19.1 | 60 | eight | 188 | 158 |
DC152.four | 152.4 | 52 | 40 | 19.1 | sixty | eight | 250 | 158 |
DC152.4P | 152.4 | fifty two | 40 | 19.one | sixty | 8 | 378 | 158 |
Chain no. | Pitch P (mm) | Internal width of inner hyperlink b1(min) (mm) | Diameter of roller d1(max) (mm) | Peak of sidebar h2 (mm) | Thickness of sidebar T (mm) | Diameter of pin d2 (mm) | Length of pin L(max)(mm) | Hole diameter of attachment plate d4(mm) | Central distance of holes of attachment plate | Outer width of attachment plate W(max)(mm) | Tensile power Q(min)(KN) | Weight for each meter q (kg/m) | |
F(mm) | h(mm) | ||||||||||||
HR6608-S-F20 | sixty six.27 | 27 | 22.2 | 28.six | 6.three | eleven | 65.seven | 9.5 | ninety five.six | 25 | a hundred and eighty | 70.6 | 65 |
HR6608-S-F25 | sixty six.27 | 27 | 22.two | 28.six | 6.3 | eleven | sixty five.7 | 9.5 | 95.six | fifty | 230 | 70.six | eighty |
HR6608-S-F28 | 66.27 | 27 | 22.2 | 28.6 | 6.three | eleven | 65.7 | nine.5 | ninety five.six | 50 | 260 | 70.6 | ninety |
HR1 514 8-S-F15 | one zero one.sixty | 27 | 22.2 | 28.six | six.3 | 11 | sixty five.seven | seven.5 | 63.5 | 21 | 130 | 70.six | one hundred thirty |
HR1 514 eight-S-F20 | one zero one.60 | 27 | 22.2 | 28.six | 6.3 | 11 | sixty five.7 | nine.five | 95.6 | twenty five | 180 | 70.6 | 210 |
HR1 514 eight-S-F25 | one hundred and one.60 | 27 | 22.two | 28.6 | 6.3 | 11 | 65.7 | 9.five | ninety five.6 | fifty | 230 | 70.6 | |
HR1 514 8-S-F28 | one zero one.60 | 27 | 22.two | 28.6 | 6.3 | 11 | 65.7 | 9.five | ninety five.six | 50 | 260 | 70.6 |
Chain no. |
Pitch P (mm) | Internal width of internal url b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Height of sidebar h2 (mm) | Thickness of sidebar T (mm) | Width of scraper B(mm) | Tensile power Q(min)(KN) |
M80-a hundred | a hundred | 25 | forty | ten | 28 | 6 | 6 | 65 |
M80-a hundred twenty five | 125 | 27 | fifty | 12 | 32 | six | 6 | eighty |
M80-one hundred sixty | a hundred and sixty | 27 | 50 | twelve | 36 | 6 | 5 | ninety |
M80-160H | 160.00 | 32 | sixty | fifteen | fifty | eight | 8 | 130 |
M90-200 | two hundred.00 | forty | eighty | eighteen | 50 | ten | 10 | 210 |
Proportions of Attachment Plate | |||||
Chain no. | B2(mm) | B3(mm) | d4(mm) | L(mm) | L1(mm) |
M80-a hundred | 50 | sixty | nine | sixty | eighty |
M80-125 | sixty | seventy one | 11 | seventy five | a hundred |
M80-160 | 60 | seventy one | 11 | 80 | a hundred and ten |
M80-160H | sixty five.00 | 78 | 13 | 80 | one hundred twenty |
M90-200 | 70.00 | 90 | thirteen | one hundred | one hundred forty |
For far more than 20 years, we have targeted on custom chains.
For far more than twenty a long time, We have carried out hundreds of different types of industrial chains.
So we have a prosperity of custom chain encounter.
Right here are some of the versions of the chains.
Why Choose DCC?
1.Montreal YWINwu chain transmission production co.,Ltd is a expert manufacture of chains,and is the member device of China Countrywide technological committee for standardization for china transmission,
2.we occupied an area more than 100 thousand sqm,owned normal workshops in excess of thirty thousands sqm and over 300sets of professional equipments to create chains in big-scale as effectively as complete inspection and examination units.
3.we handed by way of the authentications of ISO9001:2000 international high quality system and ISO14001 environmental administration method .
four,we have 75% of products which are exported to Europe,The us,Japan , Southeast Asia ,and so on,
5.A lot more than 10years manufacturing facility experience ,Virtually all the parts are made by our very own factory,therefor we can manage the cost and high quality.
Select DCC,you choosed Higher top quality , competitive price,perfect services,