1PCS Equipment Motor All YWIN DC Motor YWIN DC 3V 6V one:90 110rpm For Robot Auto
These gearbox motors (also acknowledged as ‘TT’ motors) are an simple, lower-price way to get your tasks shifting.
This is a TT DC All-YWIN YWIN Motor with a gear-ratio of 1:90 aboutdouble of the ‘standard’ 1:forty eight ratio.
That provides them increased torque but slower rotational pace.
Considering that they’re slower they’re good for robots where power is much more essential than pace.
They look a good deal like our yellow all-plastic-gearbox motors but these have all of the motor gears machined from steel, so they will not strip as very easily, and they’re twice as sluggish (and two times as effective) offered their lower gearbox ratio. The steel gears also indicate they’re louder when working.
You can power these motors with 3VDC up to 6VDC, they’re going to of program go a minor faster at the increased voltages. We grabbed one particular motor and identified these stats when working it from a bench-top supply
- At 3VDC we calculated 80mA @ sixty RPM no-load, and .5 Amps when stalled
- At 4.5VDC we measured 90mA @ 90 RPM no-load, and .8 Amps when stalled
- At 6VDC we measured 100mA @ a hundred and twenty RPM no-load, and 1. Amps when stalled
Be aware that these are really fundamental motors, and have no constructed-in encoders, pace handle or positional opinions. Voltage goes in, rotation goes out! There will be variation from motor to motor, so a independent suggestions technique is needed if you want precision motion.
Specification:
|
Circumstances of YWIN Procedure |
|
|
Proposed Voltage |
3.0V DC Consistent among motor terminals |
|
Direction of rotation |
Bi-directions |
|
Gear box position |
All instructions |
|
Storage Humidity Range with the exception of equipment box |
thirty%~70% |
|
Procedure temperature variety with the exception of gearbox |
+10ºC~+50ºC |
|
Storage temperature Variety with the exception of gearbox |
-10ºC~+40ºC |
|
Gear box sound: 70dB (Max) |
Track record sounds: 35dB (Max) |
|
Electrical Characteristics (DC 6V) |
|
|
Load |
1.316mN.m |
|
No load Current |
140mA (140mA Max) |
|
Present beneath rated load |
140mA (140mA Max) |
|
Velocity beneath rated load |
105±10% Rpm |
| Starting Voltage | 1.2V (one.6V Max) |
| Current by certified test | 140mA Max (DC3V) |
