170HP China YWIN Little Motor Graders Py165h with Rear Ripper (ZF YWIN) in Cambodia
Requirements
Engine: YWIN 6BT5.nine-C168
Rated Electrical power:125KW/2200(r/min)
Transmission:WG180 (ZF engineering)
Equipment Change:6 ahead 3 reverse
Motor Grader PY165H
Description of Motor Grader:
A motor grader,also typically identified as a road grader, a blade, a maintainer, is an engineering automobile or design tools(design equipment) with a huge entrance dozer employed to create a flat area.
Characteristics of Motor Grader PY165H:
one. Sing-handle electro-hydraulic controlled energy-shift T/M, six forward&three reverse shifts makes procedure easy and convenient
two. YWIN lock, auto lock/unlock NO-SPIN differential guarantees balance
3. Strong traction offer axle load allocation offers superb stability even though chopping tough floor
4. Serviceable, effective hydraulic system enables each and every element to be fully utilized
5. Box-typed frame and YWINd T/M allow it to complete hefty-obligation function
6. A extensive operating selection is accomplished through versatile blade suspension method and articulated body
Applications of Motor Grader PY165H:
As a type of engineering motor vehicle/design products (development machinery), motor grader PY165H is utilised to generate flat floor in the airport or design of paved highway.
Requirements of Motor Grader PY165H:
| General Dimension | |||
| one | Size | 8630mm | |
| two | Width | 2600mm | |
| three | Top(To the leading of the cab) | 3370mm | |
| 4 | Wheel foundation | 6100mm | |
| five | Tread | 2120(mm) | |
| Primary Specialized Specification | |||
| one | Running weight | 14500kg | |
| 2 | Blade length | 3660mm | |
| 3 | Blade height | 645mm | |
| 4 | Blade width | 18mm | |
| five | Max lifting top | 450mm | |
| 6 | Max grading depth | 535mm | |
| seven | Min. turning radius | 7300mm | |
| 8 | Pivot angle frame | +260 | |
| 9 | Max turning angle(front wheel) | +490 | |
| 10 | Oscillating angle of entrance axle | 320 | |
| 11 | Entrance axle center floor clearance | 610mm | |
| 12 | Traveling pace(Km/h),6 forward and 3 reverse | ||
| (1) 1 gear ahead | 6.5 | ||
| (2) 2 equipment ahead | eleven.4 | ||
| (3) 3 equipment forward | 14.6 | ||
| (four) 4 gear ahead | 24.eight | ||
| (five) 5 equipment ahead | 30 | ||
| (six) 6 gear forward | forty nine.two | ||
| (seven) 1 equipment reverse | 6.five | ||
| (8) 2 gear reverse | 14.six | ||
| (nine) 3 gear reverse | 30 | ||
| Diesel engine | |||
| one | Model | YWIN 6BT5.nine-C168 | Chinese motor D6114ZG9B |
| two | Type | Direct injection. Turbocharged. Water cooling | |
| three | Rated output | 125kW | 125kW |
| four | Inter-bore of cylinder/Stroke | 102/one hundred twenty (mm) | 114/one hundred thirty five (mm) |
| five | Complete exhaust of cylinder | 5.9(L) | eight.3(L) |
| 6 | Electrical power of begin motor | four.5(KW) | 7.five(KW) |
| seven | Voltage of starting up motor | 24(V) | 24(V) |
| eight | Rated pace | 2200(r/min) | 2200(r/min) |
| nine | Max. Torque | 733(N.M) | 600(N.M) |
| ten | Starting kind | Electrical | Electric |
| 11 | Min. certain gas use | 201(g/Kw.h) | 226(g/Kw.h) |
| twelve | Net weight | 452(kg) | 640(kg) |
| Transmission Program | ||
| 1.Torque Converter | ||
| 1 | Model | WG180 (ZF technologies) |
| two | Type | three-aspects.solitary phase |
| three | Torque ratio | 2.fifty two |
| four | Cooling type | Pressure oil circulating |
| two.Transmission scenario | ||
| 1 | Model | WG180 (ZF engineering) |
| 2 | Variety | electrical power shift, single-change lever, natural-shift lock device |
| 3 | Equipment change situation | six Ahead and three reverse gears |
