Stainless Steel Water Pump for Chemical Production

Stainless Steel Water Pump for Chemical Production

Short introduction:

ZB series chemical approach pump which includes ZBG(closed impeller variety), ZBK(semi-open impeller sort) and ZBQ(fully-open up impeller sort). It is an elaborately created chemical procedure pump of new technology which absorbed the YWINd technologies of equally house and aboard,and removed the specialized flaws of IH and CZ chemical process pump,with the positive aspects of greater anti-cavitation overall performance, secure sealing efficiency, easy operation and easy upkeep. The large interchangeability,reworking buildings and various anti-corrosive components satisfy the specifications of different apps,and as a result is commonly used.

Parameters:
 

Flow rate: Q= 2~2050 (m³/h)
Total head: H=3~150 (m)
Pump speed: n=1450/2900rpm
Design temperature: T=-twenty~150ºC
Fluid s.g.: γ≤1.eighty five
Pump diameter: fifty~350mm

Functions:

  1. Conform to ISO2858(GB5662)and GB/T5656(equivalent to ISO5199)
  2. YWIN shaft of increased diameter, the bearing capacity of bearings is averagely increased by 75~a hundred and sixty%, the life of bearings are tremendously extended.
  3. Forced internal cooling cartridge mechanical seal and big sealing chamber reduced the possibility of breakdown.
  4. Easy adjust method of pump rotor part to maintain low pressure of sealing chamber, to reduce the axial force,and therefore guaranteed the stable operation of pump.
  5. Several transforming designs enlarged the range of application of pump, increased the reliability of pumping special fluids.
  6. High interchangeability of pump parts reduced the cost on spares  parts for clients.

Construction:

  1. Single stage,single suction,horizontal centrifugal pump. Bracket structure for bearing parts, the bearing housing is supported by the bracket. The axial displacement of pump rotor part can be adjusted by a special bolt. Closed impeller(ZBG type),semi-open impeller(ZBK type) and fully opened impeller(ZBQ type) are available.
  2. The impeller is connected with shaft by screw thread, an anti-vortex plate is adopted at the pump inlet to increase the reliability of pump.
  3. The impeller with rear blades is adopted to balance the axial force at the pump suction. And the gap between the rear blades of impeller and pump cover can be adjusted by a bolt.
  4. The pump structure is back pull type,the rotor part(impeller,shaft,shaft sealing and bearings) can be removed without dismantling the pipes during maintenance.
  5. The shaft sealing is cartridge mechanical seal, and can be customized as single mechanical seal, packing sealing and secondary impeller+packing sealing.

Configuration:

Application:

ZB series chemical process pump is suitable to pump clean fluids, fluids with small quantity of small particles and corrosive fluids. The fluids including: inorganic acid,organic acid, petrochemical fluids,organic compounds and other corrosive fluids. The ZB series pump is mainly applicable for:

  1. Refinery,petrochemical industries,coal mine process industry and low temperature projects.
  2. Chemical industry,paper-generating,paper pulp industry,sugar industry.
  3. Water treatment plant, seawater desalination projects
  4. Power plant
  5. Environment protection projects
  6. Vessel and offshore industries.

 

Stainless Steel Water Pump for Chemical Production

TAGs: