Electric Fan Motor

Electric Fan Motor

Category: Tag:

Description

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric motor, capacitor and quickness control switch is still hooked up however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “Application Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). If you order several motor at a time, we will do our best to supply your order with each one kind of control or the additional.
Application Note: Do NOT use this electric motor in a nonfan application. This is a totally enclosed fan electric motor and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electric motor will overheat and get into automatic thermal overload if run in a nonfan program where there isn’t strong ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric motor is manufactured in China.