Nickel Pump for Caustic Soda Factory

Nickel Pump for Caustic Soda Factory

Short introduction:

ZXF tiny ability chemical procedure pump is a centrifugal pump of solitary stage,solitary suction and cantilever kind. It is mostly applicable for processes of petrochemical,chemical,synthetic fiber,fertilizer,energy plant,metallurgy,foods and medicine…And it is suited to pump clean fluids,fluids of lower temperature or higher temperature,and corrosive fluids. Its layout temperature assortment is -20ºC~150ºC. 

Parameters:
 

Flow rate: Q=one.six~six.3 (m³/h)
Total head: H=20~120 (m)
Speed: n=1450rpm/2950rpm
S.g.: γ ≤1.84
Temperature: T=-20~150ºC 
Diameter: fifteen~32mm

Features:

  1. Comforts to API610,with high reliability,stability and long life.
  2. Special pump passage design to eliminate loss of second reflux,enables the high efficiency at small flow rate.
  3. Cone sealing chamber design with good self flush performance,simplified the auxiliary system of the mechanical seal.
  4. Big capacity oil reservoir and big oil reflux passage prolong the life of bearings. 
  5. YWIN duty shaft design with better strength performance.
  6. High universalization,standardization and interchangeability
  7. Various anti-corrosive material for different processes.

Structure:

  1. Single stage,single suction,cantilever type chemical centrifugal pump.
  2. Both foot mounted and centerline mounted structure are availableRadial split casing.
  3. Bearings are adjustable rotary part installed in the bearing housing.
  4. Pump outlet on one side of casing.
  5. Mechanical seal is adopted as the shaft sealing.
  6. Direct coupled by claw type couplings or flexible couplings.

Configuration:

Software:

  1. Mainly applicable for processes of petrochemical,chemical,synthetic fiber,fertilizer,power plant,metallurgy,food and medicine…
  2. Suitable to pump clean fluids,fluids of low temperature or high temperature,and corrosive fluids.

Performance:

 

Nickel Pump for Caustic Soda Factory

TAGs: