INTRODUCTION
Steel Drag chains are created for severely abrasive and incredibly high-temp purposes. For example, sizzling clinker and very hot lime drag conveyors that run up to 1000ºF levels. To supply increased exhaustion existence this sequence of chain is made with unique warmth taken care of and induction hardened pins. To provide a better sliding resistance, equally sides of the chain have a bead of hard experience weld.
| Chain no. | Pitch P (mm) | Interior width of internal link b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Peak of sidebar h (mm) | Thickness of sidebar T (mm) | Width of scraper L (mm) | Top of scraper h2 (mm) | Tensile strength Q (min) (KN) |
| LTF665 | 66.five | 26.five | 22 | 12 | thirty | six | 164 | 30 | one hundred thirty |
| LTF665 | sixty six.five | 26.five | 22 | twelve | thirty | 6 | a hundred and eighty | 30 | one hundred thirty |
| LTF665 | 66.5 | 26.five | 22 | twelve | 30 | six | 225-265 | thirty | one hundred thirty |
| LTF110 | one hundred | 38.five | 36 | sixteen | forty | 6 | 225-305 | forty | 220 |
| LTF1 a hundred and ten | 100 | 29.six | 22.3 | eleven.1 | 29 | five | 185 | 29 | 90 |
| LS125 | a hundred twenty five | 32.five | 28.6 | fourteen.3 | forty two | 6 | 235 | forty two | 170 |
| LS125A | a hundred twenty five | 32 | twenty five | 17 | fifty six | 6 | 220 | fifty six | 220 |
| LS125B | one hundred twenty five | 32 | 36 | twenty | 60 | 6 | 290 | 60 | three hundred |
| LS160 | one hundred sixty | fifty two | 40 | twenty | fifty five | nine.5 | 470 | fifty five | 378 |
| LS160A | a hundred and sixty | fifty two | forty | twenty | 55 | 9.5 | 580 | fifty five | 378 |
| LS160B | one hundred sixty | 45 | 39.three | 22 | sixty | eight | 360 | 60 | 470 |
| LS160C | one hundred sixty | 36.8 | 36 | eighteen | forty eight | eight | one hundred sixty | 48 | 240 |
| LS160D | one hundred sixty | 45 | 39.three | 22 | 60 | 6 | 370 | sixty | 352 |
| Chain no. | Pitch P (mm) | interior width of internal hyperlink b1(min) (mm) | diameter of roller d1(max) (mm) | diameter of pin d2 (mm) | height of sidebar h (mm) | thickness of sidebar T (mm) | width of scraper L (mm) | peak of scraper h2 (mm) | tensile energy Q (min) (KN) |
| M56-P63*218 | 63 | 24 | 10 | 30 | 4 | 218 | 30 | 56 | |
| GLF66.five*one hundred sixty/4L | 66.five | 26.5 | 12.seven | 30 | six | a hundred and sixty | thirty | a hundred | |
| GLF66.five(6)D*200 | 66.5 | 26.5 | 12.7 | 30 | 6 | 200 | 30 | 100 | |
| LTF665-164 | sixty six.five | 26.five | 22.23 | 12 | thirty | six | 164 | thirty | a hundred thirty |
| LTF665-one hundred eighty | sixty six.five | 26.5 | 22.23 | twelve | thirty | six | one hundred eighty | 30 | 130 |
| LTF665-130 | sixty six.5 | 26.five | 22.23 | twelve | thirty | six | 130 | 30 | one hundred thirty |
| LTF665-225 | 66.five | 26.5 | 22.23 | 12 | thirty | six | 225 | thirty | a hundred thirty |
| TGSS25A 3 | one hundred | 38 | 36 | 16 | forty | six | 232 | 40 | 123.five |
| DC1000ST000 | a hundred | 25 | 14 | forty | five | a hundred and eighty | forty | 156 | |
| P100*one hundred seventy five | 100 | 25 | 10 | 30 | five | 175 | 30 | 88 | |
| GLF100(6)D*225 | one hundred | 38 | 36 | sixteen | forty | six | 225 | 40 | one hundred fifty |
| GLF100(6)D*294 | a hundred | 38 | 36 | sixteen | forty | 6 | 294 | 40 | a hundred and fifty |
| LTF100 | a hundred | 29.6 | 22.23 | 12 | 30 | six | 185.six | 30 | 130 |
| P110F2/2L | one hundred twenty five | 32 | fifteen.85 | 35 | 6 | 235 | 35 | one hundred seventy | |
| P125-Tip-A | 125 | thirty | 15 | forty | five | one hundred sixty | 40 | 80 | |
| DC1250ST005 | a hundred twenty five | 35 | eighteen | 50 | six | 200 | fifty | 176.4 | |
| DC1250ST006 | a hundred twenty five | 35 | 18 | fifty | 6 | 250 | fifty | 176.4 | |
| DC1250ST007 | one hundred twenty five | 35 | 18 | 50 | 6 | three hundred | fifty | 176.4 | |
| DC1250ST 514 | a hundred twenty five | 30 | 16 | forty | 6 | 280 | forty | 169 | |
| DC1250ST011 | a hundred twenty five | twenty five | fourteen | 35 | 5 | 180 | 35 | 117 | |
| M224-P125*385 | 125 | 43 | 21 | sixty | eight | 385 | 60 | 224 | |
| M224-P125*285 | 125 | 43 | 21 | 60 | 8 | 285 | 60 | 224 | |
| GSS630 | a hundred twenty five | 52 | 40 | twenty | 60 | 10 | 590 | sixty | 274.4 |
| DC125OST012 | one hundred twenty five | 25 | fourteen | forty | five | three hundred | 40 | 156 | |
| M112-P125*285 | 125 | 32 | 15 | forty | 6 | 285 | forty | 112 | |
| P125 | a hundred twenty five | 52 | forty four | 22 | sixty | ten | 445 | 60 | 376 |
| GLF125(six)D*300 | 125 | 32 | eighteen | fifty | six | 300 | fifty | one hundred ninety | |
| FV90-P125-a hundred and seventy | a hundred twenty five | twenty five | fourteen | 35 | five | a hundred and seventy | 35 | 90 | |
| M112-P125*385 | 125 | 32 | fifteen | 40 | six | 385 | forty | 112 | |
| P150-Suggestion-A | a hundred and fifty | 30 | 15 | 40 | 5 | 210 | forty | eighty | |
| P160-Idea-A(I) | one hundred sixty | thirty | 15 | 50 | six | 265 | 50 | 140 | |
| P160-Idea-A(II) | 160 | thirty | 15 | 45 | six | 265 | 45 | 112 | |
| FV180-P160 | a hundred and sixty | 45 | 20 | 50 | 8 | 390 | 50 | a hundred and sixty | |
| GLF160(B)D1385 | one hundred sixty | 36 | 36 | 17.8 | 50 | eight | 385 | fifty | 254 |
| P200*825 | 200 | 20 | 25.four | 63.5 | twelve.seven | 825 | sixty three.five |
| Chain no. | Pitch P (mm) | Inner width of internal hyperlink b1(min) (mm) | Diameter of roller d1(max) (mm) | Diameter of pin d2 (mm) | Top of sidebar h2 (mm) | Thickness of sidebar T (mm) | Width of scraper L (mm) | Tensile strength Q (min) (KN) |
| DC101.six | a hundred and one.6 | 31.75 | 31.75 | 15.8 | 50 | 8 | 154 | 138 |
| DC101.6 | 101.6 | 31.seventy five | forty | 15.8 | 50 | 8 | 198 | 138 |
| DC101.6P | one zero one.six | 31.seventy five | 40 | 15.eight | fifty | 8 | 279 | 138 |
| DC152.four | 152.four | fifty two | 40 | 19.1 | sixty | 8 | 188 | 158 |
| DC152.four | 152.4 | 52 | forty | 19.1 | sixty | 8 | 250 | 158 |
| DC152.4P | 152.4 | fifty two | 40 | 19.1 | sixty | 8 | 378 | 158 |
| Chain no. | Pitch P (mm) | Inner width of internal link b1(min) (mm) | Diameter of roller d1(max) (mm) | Top of sidebar h2 (mm) | Thickness of sidebar T (mm) | Diameter of pin d2 (mm) | Size of pin L(max)(mm) | Hole diameter of attachment plate d4(mm) | Central length of holes of attachment plate | Outer width of attachment plate W(max)(mm) | Tensile energy Q(min)(KN) | Bodyweight for every meter q (kg/m) | |
| F(mm) | h(mm) | ||||||||||||
| HR6608-S-F20 | sixty six.27 | 27 | 22.two | 28.six | six.three | 11 | 65.seven | 9.5 | ninety five.six | twenty five | one hundred eighty | 70.6 | 65 |
| HR6608-S-F25 | sixty six.27 | 27 | 22.2 | 28.6 | six.3 | eleven | 65.7 | nine.5 | 95.six | 50 | 230 | 70.6 | 80 |
| HR6608-S-F28 | 66.27 | 27 | 22.two | 28.6 | 6.three | 11 | 65.7 | 9.5 | 95.six | 50 | 260 | 70.6 | 90 |
| HR1 514 8-S-F15 | one hundred and one.60 | 27 | 22.two | 28.6 | 6.3 | eleven | sixty five.7 | 7.five | sixty three.5 | 21 | one hundred thirty | 70.6 | a hundred thirty |
| HR1 514 8-S-F20 | one zero one.60 | 27 | 22.two | 28.six | 6.3 | 11 | sixty five.7 | nine.5 | ninety five.6 | twenty five | one hundred eighty | 70.six | 210 |
| HR1 514 8-S-F25 | a hundred and one.sixty | 27 | 22.2 | 28.6 | six.3 | 11 | 65.7 | 9.five | 95.six | fifty | 230 | 70.six | |
| HR1 514 8-S-F28 | one hundred and one.60 | 27 | 22.two | 28.six | 6.3 | eleven | sixty five.seven | nine.5 | 95.six | 50 | 260 | 70.6 | |
why select dcc?
one.Montreal YWINwu chain transmission production co.,Ltd is a expert manufacture of chains,and is the member device of China Countrywide specialized committee for standardization for china transmission,
two.we occupied an area above a hundred thousand sqm,owned normal workshops in excess of 30 countless numbers sqm and in excess of 300sets of skilled equipments to create chains in massive-scale as nicely as full inspection and test devices.
three.we passed by way of the authentications of ISO9001:2000 intercontinental top quality program and ISO14001 environmental management program .
four,we have seventy five% of goods which are exported to Europe,The usa,Japan , Southeast Asia ,and so on,
5.Much more than 10years factory experience ,Almost all the components are developed by our very own factory,therefor we can management the value and high quality.
Choose DCC,you choosed Higher quality , competitive price,ideal service,
For much more than 20 years, we have focused on personalized chains.
For a lot more than twenty several years, We have carried out hundreds of diverse varieties of industrial chains.
So we have a wealth of custom chain expertise.
Right here are some of the kinds of the chains.
